Anyone know where i can get Timing chain instructions for a 2013-2014 GT500

[sonicsaleen]

Anyone know where i can get Timing chain instructions for a 2013-2014 GT500

Replacing short block in a 2013 gt500 and need to know the correct way of running the chains. i have a idea but i dont want to go off that.
thank you

 

[Snoopy49]

View attachment Camshaft Removal Procedure.pdf

 

[Snoopy49]

Do not use the crank to help torque the cam bolts, use the recommended cam holder.

 

[sonicsaleen]

Remove the camshaft roller followers. is this necessary.. any instructions on removal.

where can i get that crank holder at

 

[sonicsaleen]

Im assuming the dots on the cam gears are the timing marks..

 

[Snoopy49]

I updated the pdf I posted, it contains more information.

 

[sonicsaleen]

setting timing and cams on these motors looks pretty easy as long as you can read. lol.. but is it really necessary to remove the rollers to set the timing. I have never seen anyone do that when putting on chains.

 

[Snoopy49]

I wonder how many valves will get damaged installing the heads with the roller followers installed?

 

[sonicsaleen]

thanks for the info

 

[Snoopy49]

Don't mix the followers, mark them when you take them out of the head and make sure you install them in the same head and position. They have to go back in the same hole they came out of.

 

[Catmonkey]

If you're installing the heads, you don't want to have the cam followers in the heads until you have the cams timed. If you need the cam holder and the valve spring compressor, check out Freedom Racing for the tools.

 

[sonicsaleen]

The cams are timed. I just need to put the 2 front chains on

 

[Catmonkey]

If the primary chains are not on yet, it's not timed.