Are 315's possible on the rear of a 03-04 Cobra???

BlownShelby10

Active Member
Established Member
Joined
Dec 24, 2008
Messages
1,366
Location
Northern Indiana
Can you fit 315 35 18 on a irs cobra with stock height suspension and no other mods?

Reference Thread.
 

JaCobro

FEAR not, trust in GOD
Established Member
Premium Member
Joined
Apr 25, 2020
Messages
1,266
Location
North Carolina

TerminatoRS

Well-Known Member
Established Member
Premium Member
Party Liquor Posse
Joined
Jul 29, 2019
Messages
2,058
Location
Wisconsin
Should be fine with just low profile bolts. Testimonials have revealed that not all IRS's sit perfectly, though, so one side could rub while the other side is fine. Odds are that the inner sidewalls will contact the IRS subframe when you unload the suspension (jack the rear up). However, everything will square up once she's back on the ground.
 

MaxxdOut

New Member
Established Member
Joined
Dec 17, 2017
Messages
18
Location
Denver, CO
Should be fine with just low profile bolts. Testimonials have revealed that not all IRS's sit perfectly, though, so one side could rub while the other side is fine. Odds are that the inner sidewalls will contact the IRS subframe when you unload the suspension (jack the rear up). However, everything will square up once she's back on the ground.
I guess this will be an issue when I jump the gap.
 

Users who are viewing this thread



Top