Belt size

[02StanGT]

I'm going to put on Billetflow's 4 piece set with the snub idler. What size belt should i use? (stock upper and lower pulley) I was looking at billetflows site and it says I can't use the 76.5" goodyear or gates belts with the new style idler, so will the 76" belt fit?

 

[02StanGT]

Bump

 

[SicStang03]

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm)

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............77"...................K080772...............4080772

I see 77" belt.. maybe I'm looking at it wrong. Either way, just go with what is recommended...

 

[02StanGT]

Well Billetflow recommends the 77" belt, but right next to the size it says "Can not use new bracket". I'm assuming it means you can't use the new snub idler design, but I'm not sure. Can someone with this set up chime in?

 

[02StanGT]

bump

 

[latemodelracer2]

i dont think the snub idler will work with the stock upper pulley

 

[03cobra#694]

i dont think the snub idler will work with the stock upper pulley

That`s what i`m thinking.I wonder if you put the 92mm on the snub idler?

 

[eludercobra]

That`s what i`m thinking.I wonder if you put the 92mm on the snub idler?

Still won't work with the stock pulley, billetflow snub idler is really close, even with a 2.76 and a 100mm snub it barely fits, I think the max is 2.93 and 100mm snub, and 3.0 and 92mm. If your snub is UPR or something like that it will work on the stock pulley i believe.

Just change the other pulleys and leave the snub off tell you get a smaller pulley for your blower.

 

[03dsgcobranc]

go ahead and pulley it

 

[CobraBob]

Give Billetflow a call and talk to Doug. He'll be happy to answer your questions. 313-388-8228