Bolt-on c6Z06 runs 10.13@135+
- Thread starter Robz
- Start date
you forgot to mention great air.
Hp? Mods? Time slip? Great time :beer:
The car made ~480 mustang dyno and ~530 dyno dynamics.
Car has:
American Racing Headers
4.10 gears
fast manifold
RPS Clutch
Vette Air intake
I don't have a slip.
Slicks, and lighter than stock! If I had to guess, I would have to say a sleeper cam as well. I have been around numerous of Z06's that have a cam and bolt-ons that normally run mid 10's with mid 550rwhp range. Fast nonetheless!!!
Well that's an expensive bolt on list, American Racing Headers aren't cheap, between the Fast Manifold and American Racing Headers your probably looking at $1,800.
Still impressive though.
He is all bolt on. Gary can drive and this is his 2nd Z. He held the top 1/4 mile times with his C5z and he may still be the fastest in the country for bolt on C6 Z. He does use lighter wheels, but he has no sleeper cam. He use to run high 11s bone stock, down to the filter with his C5z. He can out right drive. Most guys just don't drive their cars to their full potential.
It's very possible to do especially with good air. Those cars can make around 500rwhp with bolt on's.
30 degree weather at MIR.
Yes, slicks and skinnys. Cut a 1.4 short time.
Here is the fastest N/A internal modification list, (meaning at least a cam) most of the fastest ones are h/c/i, full bolt-on
1~~~~ ~9.977 139.39 1.44 rattt g~~~~~~ 2007 details~~ thread video
2~~~~ 10.465 133.70 1.57 tkr ~~~~~~~~ 2008 details~~ thread video
3~~~~ 10.525 132.71 1.57 07WhiteDevilZ~ 2007 details~~ thread
4~~~~ 10.560 132.78 1.56 Strange ~~~~~ 2008 details~~
5~~~~ 10.580 132.70 1.65 Burnin4 ~~~~~ 2008 details~~ thread video
6~~~~ 10.594 134.70 1.58 RichieRichZ06~ 2006 details~~ thread video
7~~~~ 10.629 130.91 1.59 MR Z ~~~~~~~ 2006 details~~ thread
8~~~~ 10.644 133.43 1.74 BillyT C6Z~~~~ 2007 details~~ thread video
9~~~~ 10.672 132.14 1.61 Retrotech~~~~ 2007 details~~ thread video
10 ~~~ 10.695 132.67 1.70 lane_change~~ 2006 details~~
11~~~ 10.695 130.52 1.57 zmanz~~~~~~ 2006 details~~ thread
12~~~ 10.743 131.43 1.57 James E. ~~~~ 2007 details~~ thread
13~~~ 10.752 133.65 1.62 10SECNZ ~~~~ 2006 details~~ thread
14~~~ 10.818 130.19 1.60 Scuba_Steve~~ 2006 details~~ thread video
15~~~ 10.841 132.95 1.82 jsb08Z~~~~~~ 2008 details~~
16~~~ 10.957 132.87 1.73 C6Z Chick~~~~ 2006 details~~ thread
17~~~ 11.077 131.91 1.83 vetteman24 ~~ 2008 details~~ thread video
18~~~ 11.115 129.64 1.91 jerseydrew~~~ 2008 details~~ thread video at 0.55
19~~~ 11.161 129.53 1.80 jtfx~~~~~~~~ 2007 details~~
20~~~ 11.507 130.01 2.13 Antonio1988~~ 2008 details~~ thread
21~~~ 11.578 125.26 1.96 cjz06~~~~~~~ 2008 details~~ thread
The C6 Z06 Fast List - Corvette Forum
Last edited:
damn. I make 200 more hp but cant even get into the 10s lol
was this your car? it just sounds a lot like Bruce's C6Z (fartpipe on Corvette forum/Zturd on ls1tech) and he is from my area.
was this your car? it just sounds a lot like Bruce's C6Z (fartpipe on Corvette forum/Zturd on ls1tech) and he is from my area.
Last edited:
He runs both slicks and drag radial. The radial will trap higher but is more inconsistent with the 6 speed. His best above et so far is on a slick. If we can get the radial to cut a 1.39 60' then he will go lower.
So you've proven he has a cam. lol.
No cam and nothing touched on the car that touches oil.
30 degree weather at MIR.
Yes, slicks and skinnys. Cut a 1.4 short time.
Here is the fastest N/A internal modification list, (meaning at least a cam) most of the fastest ones are h/c/i, full bolt-on
1~~~~ ~9.977 139.39 1.44 rattt g~~~~~~ 2007 details~~ thread video
2~~~~ 10.465 133.70 1.57 tkr ~~~~~~~~ 2008 details~~ thread video
3~~~~ 10.525 132.71 1.57 07WhiteDevilZ~ 2007 details~~ thread
4~~~~ 10.560 132.78 1.56 Strange ~~~~~ 2008 details~~
5~~~~ 10.580 132.70 1.65 Burnin4 ~~~~~ 2008 details~~ thread video
6~~~~ 10.594 134.70 1.58 RichieRichZ06~ 2006 details~~ thread video
7~~~~ 10.629 130.91 1.59 MR Z ~~~~~~~ 2006 details~~ thread
8~~~~ 10.644 133.43 1.74 BillyT C6Z~~~~ 2007 details~~ thread video
9~~~~ 10.672 132.14 1.61 Retrotech~~~~ 2007 details~~ thread video
10 ~~~ 10.695 132.67 1.70 lane_change~~ 2006 details~~
11~~~ 10.695 130.52 1.57 zmanz~~~~~~ 2006 details~~ thread
12~~~ 10.743 131.43 1.57 James E. ~~~~ 2007 details~~ thread
13~~~ 10.752 133.65 1.62 10SECNZ ~~~~ 2006 details~~ thread
14~~~ 10.818 130.19 1.60 Scuba_Steve~~ 2006 details~~ thread video
15~~~ 10.841 132.95 1.82 jsb08Z~~~~~~ 2008 details~~
16~~~ 10.957 132.87 1.73 C6Z Chick~~~~ 2006 details~~ thread
17~~~ 11.077 131.91 1.83 vetteman24 ~~ 2008 details~~ thread video
18~~~ 11.115 129.64 1.91 jerseydrew~~~ 2008 details~~ thread video at 0.55
19~~~ 11.161 129.53 1.80 jtfx~~~~~~~~ 2007 details~~
20~~~ 11.507 130.01 2.13 Antonio1988~~ 2008 details~~ thread
21~~~ 11.578 125.26 1.96 cjz06~~~~~~~ 2008 details~~ thread
The C6 Z06 Fast List - Corvette Forum
That's him from last year.
The heads/cam c6Z06 fast list(n/a) is not indicative of the cars potential.
Those et's listed are more in line with a heads/cam c5Z06 with a 346 ci motor n/a.
No, Bruce also has a bolt on c6Z that runs strong also. His best is mid 10.3x's.
There's still more in this car and we're out to prove it.
Those are the fastest recorded N/A C6Z's, I know that your car was the world's fastest h/c c5z but 1/20th of them don't run remotely close to that time.
That list is indicative of what they realistically run on average. He asked, I gave him the list.
Last edited:
nice man. you guys ever get together give me a shot.
Users who are viewing this thread
