Bullitt vs Mach 1 at the track

jmac93cobra

Same thing every dang day
Established Member
Joined
May 6, 2008
Messages
25
Location
St. George, Ut
I'm guessing you are the kid I met at the shop the other day when I was there with my 93 cobra, when did you go down to vegas and what did your car run?
 

04Cobra03

Active Member
Established Member
Joined
Jul 3, 2011
Messages
420
Location
Western USA
I'm guessing you are the kid I met at the shop the other day when I was there with my 93 cobra, when did you go down to vegas and what did your car run?

Yes we met at the shop

My bullitt ran a best of 13.7@102 and the Mach 1 ran a best of 14.3@102
Those are great times for the Vegas track with N/A cars
4500 D/A that night. It was a couple weeks ago my buddy just got the video up
 
Last edited:

04Cobra03

Active Member
Established Member
Joined
Jul 3, 2011
Messages
420
Location
Western USA
Yeah here is one of us before the race putting on the drag radials and some of my bullitt

IMG_1605_zps28217c2e.jpg


IMG_1101_zps28c1762e.jpg


IMG_1411_zps8d30b99f.jpg

cruisenight1_zps76b592ee.jpg

cruisenight2_zpsc09f6c00.jpg
 
Last edited:

Mach828

Active Member
Established Member
Joined
Mar 21, 2010
Messages
1,417
Location
Albuquerque
Yes we met at the shop

My bullitt ran a best of 13.7@102 and the Mach 1 ran a best of 14.3@102
Those are great times for the Vegas track with N/A cars
4500 D/A that night. It was a couple weeks ago my buddy just got the video up

With 315hp and bolt on's my Mach ran 13.1@104 in a 7,000ft D/A. Your Mach has a lot left in it! Should be a 12s all day in a 4,000ft D/A

What is done to the Bullitt?
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,656
Location
Cheshire, CT
Just to get the facts straight for everyone. The OP owns the Bullitt. His friend owns the Mach. The Mach (with GoPro) is in the left lane. The OP's Bullitt is in the right lane.

Nice Bullitt by the way. :)
 

04Cobra03

Active Member
Established Member
Joined
Jul 3, 2011
Messages
420
Location
Western USA
Yes I do own all 3 and I'am very excited about it lol.

Yes the mach 1 in the video has the camera inside and belongs to my friend. He ran the best of 14.3. I have not tracked my Mach 1 yet but the best time of all my 5 friends who have bolt on Mach 1's at the vegas track is my brothers Mach 1 that also did 13.7. Vegas track is pretty slick and most GTO's and new camaros run in the 14's. I have seen most bolt on new 5.0's and termi's running mid 13's down there.

here is another shot of my cars when my terminator had Cobra R wheels ( now I have OEM terminator wheels back on it)
IMG_1753_zps7d287721.jpg



and to answer the question, the bullitt has:
MMR Street Mod 600 2V/ Brand New Cast Iron 2004 Cobra Block, torque plate bored and honed.
9.5:1 Compression Ratio/ready for Super Charger, NOS.
New Ford Racing Cast Iron Crankshaft rated up to 600HP.
New 4340 5.933 MMR (Modular Mustang Racing) I-beam Rods, these rods are shotpeened, magnafluxed and weight matched.
New Forged Manley lightweight pistons.
Total Seal file fit rings (precision file fit to your application, nitrous, blower, turbo or N/A).
Clevite Rod and Main bearings.
RAM Powergrip HD Clutch (up to 650 HP).
PRO 5.0 Short Shifter.
Patriot Performance Stage II Heads
Bronze Valve Guides
Viton Valve Seals
Comp Cams XE 270's.
BBK Storty Headers.
PYPES O/R X Pipe, no CATS.
SLP catback
30 lbs FRPP Fuel Injectors.
SCT 90mm MAF.
JLT Fenderwell Cold Air Intake
FRPP Aluminum Driveshaft.
Fluidyne Radiator.
STEEDA Rear Stabilizer Bar.
STEEDA Aluminum Upper & Lower Control Arms.
STEEDA Clutch Quadrant.
STEEDA Firewall Adjuster and Clutch Cable.
STEEDA Caster/Camber Plates.
STEEDA Front Sway Bar.
STEEDA Billet Bar Mounts.
STEEDA Poly Front Spring Isolators.
Eibach Rear Springs, Offset Rack Bushings, Axle Bump Stops.
TOKICO D-Spec Shocks.
Bilstein Quad Shocks (rear)
Poly Rear Spring Bushhings.
FRPP 4.10 Rear Gears.
Alloy USA Axle shafts
TRE 255 Supercar pump
SCT Tuner.
Dyno tuned 305 RWHP

It is low compression ready for boost so the N/a numbers are not super great but still right next to a bolt on Mach 1. infact from a 5 mph roll my friends Mach 1 pulled 1 car on it but could not get any more ahead all the way past 100 which is basically trap speed in thw 1/4 so im happy with it for now.

oh and to be clear I beat the Mach 1 every one of our 5 runs except that second run where I slightly rolled forward and red lighted. Thats why you dont see my car in the second race. My friend made the movie and he ddint mention me red lighting haha.
 
Last edited:

04Cobra03

Active Member
Established Member
Joined
Jul 3, 2011
Messages
420
Location
Western USA
I have heard that track is 1 second slower than sea level tracks. Even when its prepped my buddies on full out slicks spin. the track was prepped right before my best of 13.7 and before that I was doing 14.0's all night until they prepped it
 

Users who are viewing this thread



Top