HouseOfPower
New Member
As most of you who know me have seen I'm literally liquidating everything I have lately due to my current situation and my wife losing her job leaving me as the loan supporter of my family. I literally can't believe I'm doing this but I have to grow up and realize cars will always be there but currently family comes first. I have well over $60k in parts for this current build and most of them are absolutely brand new, in the boxes and top of the line. I haven't decided what configuration to sell the twin turbo bright atlantic blue cobra in but unless someone wants to buy the car and everything I have for it for $25k and finish it themselves I guess I'm going to completely part it out to try and recover as much money as I can. Either way it's a very difficult thing for me to do 
Please don't bother lowballing me because I need money. I'll offer great deals as I always do so be respectful. Here is the thread that you can view the build:
http://www.svtperformance.com/forum...roject-while-i-wait-my-other-project-lol.html
Here's a decent list to start...Everything here is available. I will edit this post with prices later this evening. Man this sickens me
$5200:MMR stroker mod 1000SE 4.75 liter
-STD bore (3.552) Cast Iron 2004 Cobra Block, torque plate bored and honed
-4340 Forged US Made 4.75L Stroker Crankshaft w/micro polished journals
-Manley Billet pro series I beam rods
-Forged dished, coated and notched Manley pistons
-Total Seal file fit rings for turbo
-Clevite Tri-metal Rod and Performance Main bearings
-ARP main studs
-ARP 2000 rod bolts
-ARP side bolts
-Ford Racing High Volume Oil Pump (installed)
$75-Ford Racing oil filter relocation
$100-Sullivan alternator relocation
$150-MMR coolant overflow relocation
Power Adder:
$5000-Turbo horsepower 4V Twin Turbo kit
-Twin Garrett 57 MM T3/T4 hybrid Turbos
-Jig made Tig Welded four into one custom 1 ¾” headers
-Upgraded Intercooler = 30% larger
-44mm Tial billet Waste Gates
-Tial billet Blow off valve
-Jet hot coated hot and cold side
-Jet hot coated turbo exhaust housings
-Polished turbo compressors
-Battery Relocation Kit
-Custom Intake Water Cross Over Tube
-H-pipe
$150-SCT 5000 MAF
Fuel System
$800-Behind bars race cars sumped sheetmetal fuel tank
-Weldon 1200hp racing fuel pump
-Aeromotive fuel pressure regulator
-Sullivan fuel rails
-8an lines in and out
Driveline:
$2300-03/04 cobra T56
-Ram 900HD 11" clutch kit
-8bolt aluminum flywheel
-Tremec 26 spline input shaft
-FRPP throwout bearing/sleeve
-UPR quadrant
-aluminum driveshaft
-Steeda triax shifter
-welded axle tubes
$420-FRPP differential
$250-Moser 31 spline axles
$100-FMS 3:73 gears
$100-FMS rear end rebuild kit
Suspension:
$600-Maximum Motorsports severe duty torque arm
$320-Maximum Motorsports severe duty lower control arms
$110-Maximum Motorsports rear swaybar
$150-Maximum Motorsports caster camber plates
$230-UPR rear coil overs
$100-Strange 10 way adjustable shocks
$190-Strange 10 way adjustable struts
$190-QA1 front coil overs
$150-QA1 A arms
$230-AJE k member
Electronics/Gauges
$450-AEM Eboost 2 electronic boost controller/gauge
$250-Autometer phantom electric fuel pressure
Interior:
$800-Corbeau GTS2 black microsuede seats
$100-MMR carpeted rear seat delete
$100-Speed of sound pillar pod w/ raptor claw
$50-JBL Amp
Exterior:
$750--Authentic Saleen body kit
$170-Authentic Saleen S281 spoiler
$300-Cervini's cobra R hood
$100-Full Authentic Saleen graphics, decal and license plate surround kit
$15-Cobra grill emblem
$150-HID lighting
$2200-18x8.5 and 18x11" full chrome Authentic Speedlines with rears widened by Wledcraft
-brand new Hoosier 335/30/18 drag radials
- brand new Nitto NT505 255/40/18 fronts
Please don't bother lowballing me because I need money. I'll offer great deals as I always do so be respectful. Here is the thread that you can view the build:http://www.svtperformance.com/forum...roject-while-i-wait-my-other-project-lol.html
Here's a decent list to start...Everything here is available. I will edit this post with prices later this evening. Man this sickens me
$5200:MMR stroker mod 1000SE 4.75 liter
-STD bore (3.552) Cast Iron 2004 Cobra Block, torque plate bored and honed
-4340 Forged US Made 4.75L Stroker Crankshaft w/micro polished journals
-Manley Billet pro series I beam rods
-Forged dished, coated and notched Manley pistons
-Total Seal file fit rings for turbo
-Clevite Tri-metal Rod and Performance Main bearings
-ARP main studs
-ARP 2000 rod bolts
-ARP side bolts
-Ford Racing High Volume Oil Pump (installed)
$75-Ford Racing oil filter relocation
$100-Sullivan alternator relocation
$150-MMR coolant overflow relocation
Power Adder:
$5000-Turbo horsepower 4V Twin Turbo kit
-Twin Garrett 57 MM T3/T4 hybrid Turbos
-Jig made Tig Welded four into one custom 1 ¾” headers
-Upgraded Intercooler = 30% larger
-44mm Tial billet Waste Gates
-Tial billet Blow off valve
-Jet hot coated hot and cold side
-Jet hot coated turbo exhaust housings
-Polished turbo compressors
-Battery Relocation Kit
-Custom Intake Water Cross Over Tube
-H-pipe
$150-SCT 5000 MAF
Fuel System
$800-Behind bars race cars sumped sheetmetal fuel tank
-Weldon 1200hp racing fuel pump
-Aeromotive fuel pressure regulator
-Sullivan fuel rails
-8an lines in and out
Driveline:
$2300-03/04 cobra T56
-Ram 900HD 11" clutch kit
-8bolt aluminum flywheel
-Tremec 26 spline input shaft
-FRPP throwout bearing/sleeve
-UPR quadrant
-aluminum driveshaft
-Steeda triax shifter
-welded axle tubes
$420-FRPP differential
$250-Moser 31 spline axles
$100-FMS 3:73 gears
$100-FMS rear end rebuild kit
Suspension:
$600-Maximum Motorsports severe duty torque arm
$320-Maximum Motorsports severe duty lower control arms
$110-Maximum Motorsports rear swaybar
$150-Maximum Motorsports caster camber plates
$230-UPR rear coil overs
$100-Strange 10 way adjustable shocks
$190-Strange 10 way adjustable struts
$190-QA1 front coil overs
$150-QA1 A arms
$230-AJE k member
Electronics/Gauges
$450-AEM Eboost 2 electronic boost controller/gauge
$250-Autometer phantom electric fuel pressure
Interior:
$800-Corbeau GTS2 black microsuede seats
$100-MMR carpeted rear seat delete
$100-Speed of sound pillar pod w/ raptor claw
$50-JBL Amp
Exterior:
$750--Authentic Saleen body kit
$170-Authentic Saleen S281 spoiler
$300-Cervini's cobra R hood
$100-Full Authentic Saleen graphics, decal and license plate surround kit
$15-Cobra grill emblem
$150-HID lighting
$2200-18x8.5 and 18x11" full chrome Authentic Speedlines with rears widened by Wledcraft
-brand new Hoosier 335/30/18 drag radials
- brand new Nitto NT505 255/40/18 fronts
Last edited:
