Car shakes like Michael Fox

[Mok4200]

Still the same symptoms? Only shakes on take off?

Shakes anytime i use the clutch, not just take off

 

[Shadow Grey 03]

If you push the clutch pedal in and hold it, does it vary while its pushed?

 

[Mojo88]

Did you install all new parts?? i.e., Flywheel, clutch, pressure plate, throwout bearing, pilot bushing?????

Please describe issue EXACTLY, or maybe post video.

 

[Mok4200]

If you push the clutch pedal in and hold it, does it vary while its pushed?

It does not shutter when actually engaging the clutch, but when I start to disengage the clutch for take off

 

[Mok4200]

Did you install all new parts?? i.e., Flywheel, clutch, pressure plate, throwout bearing, pilot bushing?????

Please describe issue EXACTLY, or maybe post video.

Yes to everything. Mcleod flywheel and clutch, and napa *** (Literally the brand name) TOB and pilot bearing

 

[Mojo88]

Damn, with all those new, superior quality, parts........ it should be smooth as silk.

Did you test the engine mounts under load, using the procedure I described?

Take heart.... this should be relatively easy fix, once you locate the issue.

 

[Mok4200]

Did you test the engine mounts under load, using the procedure I described?

Take heart.... this should be relatively easy fix, once you locate the issue.

I have not yet done this, I will have to do it after I break in the clutch, I don't want to spin a new disk

 

[Mojo88]

I have not yet done this, I will have to do it after I break in the clutch, I don't want to spin a new disk

Oh, you don't need to put much load at all to the clutch. It will only take a small amount of force to lift the engine mount (if broken). Just a short (partial) application of clutch is all that's needed.

If you take off real gently, does it still shake??

 

[BlckBox04]

clutch chatter, completely common with fidanza
McLeod RXT twin disc, fidanza fly wheel, 26 spline input shaft, Send It!

 

[Mok4200]

Oh, you don't need to put much load at all to the clutch. It will only take a small amount of force to lift the engine mount (if broken). Just a short (partial) application of clutch is all that's needed.

If you take off real gently, does it still shake??

I'll try the load test tonight, but yes, no matter how low or high i throttle match on take off, it still shakes.