couple aeroforce gauge questions

[svtguy22]

I have a 03 cobra and cant find for the life of me how to exit the menu screen. The only way I can get back to the observation screen is by going into the setup area and click exit, but when I do that all my settings outside the setup menu are lost. I downloaded the .pdf manual and must have read it 12 times and it didnt say anything.

Oh and when I input the numbers for the annunciator lights for the rpm, how do I enter it? Is it "06000" or "6000." or what?

thanks again!

 

[Tractionless1]

Select Scan

06000

 

[svtguy22]

Thanks!

 

[Tractionless1]

Did it work?

 

[svtguy22]

yeah it did. works great now. I have another gauge on my a-pillar with this one, is there a way to pick up the 12v lead to get the lights to work on the other gauge when this one turns on?

 

[forcefedjunkie]

yeah it did. works great now. I have another gauge on my a-pillar with this one, is there a way to pick up the 12v lead to get the lights to work on the other gauge when this one turns on?

You don't want to splice into the Interceptor's wiring. Power is filtered for the processor, you don't want anything else tapped into it that may cause issues.

Todd

 

[svtguy22]

Ok, just making sure.

Thanks.