Exhaust melting bumper?

[Canson]

Hello guys, today I noticed that my left side bumper was a little melted near to the left muffler . Is it possible that the muffler has touched the bumper and melted it or what caused it?

 

[merkyworks]

maybe its just the angle of the pic but your tip looks like its not centered in the bumper cutout.

 

[Zemedici]

Muffler is too close to that Side. Square up muffler and problem solved

 

[Dinosgt]

This ^^. Just loosen the over-the-axle clamp and position them where you want them, and retighten.

If you want them to stick out more or less then you have to loosen the long clamps down near the middle of the car, and slip them in or out.


Sent from my iPhone using the svtperformance.com mobile app

 

[Canson]

This ^^. Just loosen the over-the-axle clamp and position them where you want them, and retighten.

If you want them to stick out more or less then you have to loosen the long clamps down near the middle of the car, and slip them in or out.


Sent from my iPhone using the svtperformance.com mobile app

Thanks for the info. This is what I am looking for. My Borla tip do stick out a little too much. Will fix this issue soon.

Thanks guys for the help