Fastest 82mm?

[spdracr0]

What is the fastest you have seen someone go on an 82mm pulley? Please specify if you know if there were any other aftermarket parts...thanks...I am shooting for a 9.99 with 82mm and airbox/no converter

 

[NickSezz]

We ran 10.50s or so with about 600whp through our auto car back in early 2011. 82mm pulley, no BAP, converter and 60lb injectors running VP 103 I believe.

9.99 would require a bit more power or a lot less weight.

 

[spdracr0]

I have been 10.28. 82mm only

 

[Blazer707@TBR]

I know fifty's car has been 10.2 with stock converter and stock gears.

 

[spdracr0]

over 1000ft air

 

[spdracr0]

fifty has a JLT but other than that they are pretty identical. I think I can get the 9.99 with a couple tricks, slicks and a lighter driver

 

[chrisheltra]

Wait for some good air. I'm light

 

[spdracr0]

I like your thinking!

 

[corepwn]

Mine went 10.52 and a few other 10.5 passes with an 82mm pulley, stock air box/converter/suspension, 3900lbs race weight on 93. Basically a tvs with an 82mm and race stars wheels/DRs and ORH. Link to slip in sig. I was going to run a big air cai but my car would lean out at high rpm with the 47lb injectors so I went back to the air box.

 

[SILV03MustangGT]

10.88@134 on E85 mods in sig

 

[BMR Tech]

Not the fastest, but here is what our car went with the 82mm and 14 degrees timing on 93.