Finally got to the Dyno

fivelitrecobra

Active Member
Established Member
Joined
Jul 2, 2013
Messages
533
Location
PA
Finally got my 03 Termi on the dyno. Mods are..........

Steggy ported blower
2.93 upper
4lb lower
3.2 alt pulley and 4 piece Billetflow pulley set
JLT high boost intake
LFP single blade TB and Accufab plenum
Bassani offroad X and 2.5" exhaust
SCT2600
KB BAP and 60# injectors
Afco heat exchanger

The car made 504whp 489tq in 90 degree heat. Tuner said it would have went 10-15hp more if it was 50 degrees outside instead of 90. Car runs great, very happy with the results!
 

BLOWN9646

E85 COBRA
Established Member
Joined
Apr 12, 2006
Messages
2,223
Location
N IL
Picked up 50whp with 2* added. Made 530/508 heat soaked on E85. I have ported stock tb/plenum
 
Last edited:

04RFVert

Member
Established Member
Joined
Mar 21, 2017
Messages
38
Location
Raleigh NC
I got about 40 more on e85 with BAP and 80lbs injectors. Could have gotten more if my pumps didnt start to max out.
 

BLOWN9646

E85 COBRA
Established Member
Joined
Apr 12, 2006
Messages
2,223
Location
N IL
Just pumps and wiring upgrades to the battery and modified hat, for dual FPDM setup (overkill really, single modded FPDM is fine). 60's were enough for mine. The AEM 320's weren't available yet so I went with stryker 340's, but I will be changing them to 320's eventually for piece of mind and also add the -8 fuel line
 
Last edited:

c6zhombre

E85 NutSwinger
Established Member
Joined
Sep 14, 2008
Messages
5,430
Location
League City, TX
Picked up 50whp with 2* added. Made 530/508 heat soaked on E85. I have ported stock tb/plenum

Nice! That's pretty damn good with no boost change.

The liquid gold is definitely where it's at on these cars. My pump gas tune makes 560/550, the E85 setup makes 714/680. Now granted that's with 4psi more boost....and the 93 tune is ultra conservative timing...but it's a WILD transformation when I switch between setups.
 

Users who are viewing this thread



Top