First Dyno

[Flad]

finally had her on the dyno this weekend.
Mods are Catback, and RAI.
Put down 382 hp and 375 tq.
The AF was at 10.1
I"m guessing the results are fairly normal for these mods and stock tune.

 

[SLEEPERSTATUS]

thought those mods are good for 400??

 

[Flad]

Truthfully, I was hoping for a little more. but it is what it is

 

[SLEEPERSTATUS]

Truthfully, I was hoping for a little more. but it is what it is

forsure.......was it really hot outside?

 

[Flad]

91, not sure about the Humidex

 

[prostkr]

do something about the air fuel and it will be over 400.

 

[baby2000]

Have your tuner work on that AIR/FUEL and i am pretty sure you will get the 400 horse.

 

[SVT03Chris]

Bring that A/F up and you will notice a difference in power.

 

[hand-to-ball]

finally had her on the dyno this weekend.
Mods are Catback, and RAI.
Put down 382 hp and 375 tq.
The AF was at 10.1
I"m guessing the results are fairly normal for these mods and stock tune.

My baseline 100% stock was 357/366, so you're #'s are a little low, but not bad.

 

[Flad]

The tuner also mentioned that I would see the big 40 with a tune only.
Trying to keep the mods to just boltons. Also still have 2 years of warrenty left

 

[Flad]

My baseline 100% stock was 357/366, so you're #'s are a little low, but not bad.

Wish I would have done a baseline before the exhaust and intake , my guess is that it would have been in the upper 340 stock, probebly on the low side of most cobras.

 

[c6zhombre]

don't lose any sleep over those numbers....those aren't that bad and dyno differences/heat soak/weather can play a major factor. Get the car tuned, let her cool down real good and get her on the rollers again! :beer:

 

[KILRSVT]

+1 on ^^^^ also some dyno's are diffrent than others some put more load than others...you can dyno 382 on this guys dyno and maybe 400 in another dyno...your numbers are pretty good.

 

[trmin8ter03]

Those numbers are fine. When I first dynoed my car with the same mods as you it was at 394rwhp and 375rwtq. People that say they are over 400rwhp with those mods are probably talking out their ass.

 

[SLEEPERSTATUS]

what octane........ what timing?

 

[03cobra#694]

A/F is a bit on the fat side.
Edit:Where did you get it dynoed at?

 

[Pock]

Not bad. Can't you get a handheld and throw the stock tune back in it for the warranty?

 

[BigSweezey]

Work on the A/F, 10 is richer than most people shoot for. You'll see 400. With a K&N intake, I put down 388 on a cooler day.

 

[SpectorV]

its odd, most go lean with no tune and intake/exhaust

 

[Flad]

what octane........ what timing?

93 BP is all this car has ever seen, not sure on the timing....guessing what ever the stock timming is , I will call the tuner and ask ...good point
thanks