Pavers are normally placed on base of like 3/4 minus (chat) and then sand.
As stated above the issue is more likely that the floor jack or jack stands could place too much of a point load or over turning moment on the pavers.
Fear not!, you just need to spread the load out, like 5/8" plywood should get you down to a safe psi load. Turn that point load into an area load and no issue.
E
As stated above the issue is more likely that the floor jack or jack stands could place too much of a point load or over turning moment on the pavers.
Fear not!, you just need to spread the load out, like 5/8" plywood should get you down to a safe psi load. Turn that point load into an area load and no issue.
E