MedVader said:Take a look at the motor and tell me why the blower snout would point backwards.
http://www.fordvehicles.com/fordgt/images/photo_gallery/ph_gt_popup_12.jpg
That is the front of the engine. Damper, accessories, etc. And there's the blower pointing in the forward direction. Now if you tell me the engine motor mounts make it so it has to be dropped in backwards, I could understand that. But it looks like a GT blower/lower/heads could be dropped into any 5.4 car/truck.
Sorry I was less than clear. The top end should work, just not the block without the modifications I stated above.