Have a complete eaton swap including
timing cover
pulley bridge with pullies
home ported eaton tb/plenum (painted black needs to be painted).
Stock eaton tb/plenum
N2o plate for blower
Metco 4# lower kit
Metco 2.8 upper pully
stock upper pully
metco Belt wrap pully kit
Correct length belt
afco heat exchanger Says big worm on the front.
stock heat exchanger
Heat exchanger brackets
ONe alernator that needs rebuilding (bearing going out)
one freshly rebuilt alternator.
alt bracket
stock intake/ mass air
Might sell the jlt high boost that i have.
03/04 fuel tank
03/04 fuel hat with dual focus svt pumps, braded line, and pprv delete
All coolant lines for heat exchanger
2 intercooler pumps.
lower intake
heat exchanger
front plate for lower intake.
all studs/ bolts for timing cover.
39# injectors
fuel rails
WILL NOT SEPPERATE!!!!
Can call or text at 4098824382 jimmy.
Best offer.
will sepperate the pumps/tank from the rest.
timing cover
pulley bridge with pullies
home ported eaton tb/plenum (painted black needs to be painted).
Stock eaton tb/plenum
N2o plate for blower
Metco 4# lower kit
Metco 2.8 upper pully
stock upper pully
metco Belt wrap pully kit
Correct length belt
afco heat exchanger Says big worm on the front.
stock heat exchanger
Heat exchanger brackets
ONe alernator that needs rebuilding (bearing going out)
one freshly rebuilt alternator.
alt bracket
stock intake/ mass air
Might sell the jlt high boost that i have.
03/04 fuel tank
03/04 fuel hat with dual focus svt pumps, braded line, and pprv delete
All coolant lines for heat exchanger
2 intercooler pumps.
lower intake
heat exchanger
front plate for lower intake.
all studs/ bolts for timing cover.
39# injectors
fuel rails
WILL NOT SEPPERATE!!!!
Can call or text at 4098824382 jimmy.
Best offer.
will sepperate the pumps/tank from the rest.
Last edited: