like title says, i have a set of maximum motorsports front delrin control arms 99-04 part #MMFCA-8. Which is the zero offset. Tried fabbing MM's front supsension on my 68 mustang but the suspension geometry would be way to off. Wasnt possible. Instead used a different crossmember and A Arms but was able to use the sn95 spindles and MM's coilovers. Cant attach pics so pm email address or post it and i can send you some. Never installed, just the box from mm was opened! Look brand new like they came obviously. Also, have 4 low profile A arm bolts.
Asking:
$430 shipped for the A arms
$25 shipped for 2(pair) of the low profile bolts (have 2 sets)
also have MM hellioin K member part #MMKM-3 only problem was we cut it 3 inches down from the brace that bolts to the frame rail on both sides. If you can weld, would line right back up, just throw a tig weld on it and you'll be good. Or i can have it welded by my fabrication buddy for alittle extra, would need paint around where it was welded or re powder coated. Would like to get $300 plus shipping. Thats less then half price, though yes it is cut but after welded and power coated would still save acouple hundred dollars.
Asking:
$430 shipped for the A arms
$25 shipped for 2(pair) of the low profile bolts (have 2 sets)
also have MM hellioin K member part #MMKM-3 only problem was we cut it 3 inches down from the brace that bolts to the frame rail on both sides. If you can weld, would line right back up, just throw a tig weld on it and you'll be good. Or i can have it welded by my fabrication buddy for alittle extra, would need paint around where it was welded or re powder coated. Would like to get $300 plus shipping. Thats less then half price, though yes it is cut but after welded and power coated would still save acouple hundred dollars.