FS/Part Out: Built IRS

[03rd SVT]

I will sell complete, rotor to rotor plus shocks and springs or part out if I can get the axles sold. I'm open to all reasonable offers. All after market parts are about 3k miles old, stock parts have under 25k.

DSS Level 5 axles
Urithane subframe bushings
Urithane upper control arm bushings
Urithane lower control arm bushings
IRS brace
Solid mount
Adjustable sway bar end links
Adjustable tie rod ends
Wheel studs
Stock center section/gearing
Stock Springs
Stock Shocks

Thanks,
Hagg

 

[01Cobra896]

Dibbs on the center section and gears. I will PM you with details.

 

[Red99SVT]

How much complete?

 

[Carbon Driven]

IRS brace, how much? Brand and color?

 

[Lightning&Mach1]

How much for level 5 axles?

 

[jdh1213]

+1 on the axles

 

[03rd SVT]

I will sell complete plus suspension for $2000.

Asking $1100 for the axles.

I'll have to go back and see what the brace is, I don't remember which brand. It is black. I'll check on it and get back with you on a price.

I have an offer on the center section, so if the axles sell everything will be parted out.

 

[JonB]

I need the knuckles. - can you seperate from the hubs, or are they going with the axles?

 

[03rd SVT]

I need the knuckles. - can you seperate from the hubs, or are they going with the axles?

Sorry, not separating.....

 

[Lightning&Mach1]

What all comes with the axles and u got a pic of everything?

Thanks

 

[01trublue cobra]

What brand is the tierod ends?

 

[Mystic-SVT]

If you part out I'd like to get the solid differential mount

 

[03rd SVT]

Axles will be complete, straight bolt in ready. Pull your's out and slide these in.

I will have to check and see what brand the tie rod ends are.....

PICS:

 

[Lefty10]

^Such a clean IRS lol

GL w/ the sale OP :beer:

 

[03rd SVT]

:-D

If you part out I'd like to get the solid differential mount

That would have to be getting the subframe and IRS brace. We did this ourselves, and as you can see from the pics of it, it's nothing more than a tab welded to the back of the subframe and a nut welded to the IRS brace. If you wanted to do this yourself it's pretty easy to fabricate. I will be selling the subframe with all the urethane bushings installed too tho....

 

[03rd SVT]

I need the knuckles. - can you seperate from the hubs, or are they going with the axles?

Are you talking the part where the control arms mount to?

 

[01trublue cobra]

What brand is the tierod ends?

What brand are the adjustable tierod ends?

 

[03rd SVT]

What brand is the tierod ends?

I think these and the sway bar end links are Maximum Motorsports pieces.

 

[03rd SVT]

IRS brace, how much? Brand and color?

I'm pretty sure this is a Billetflow brace.

 

[Carbon Driven]

Ok cool, how much?