Happy to be a dealer for what we think is the best fuel filter on the market.
Available with an inline type, and spin on filter design, these filters do a great job.
Spoke extensively with Rick Rollins the owner of FST and he really has us sold on the product.
The inline Flowmax 700
In-line fuel filter using FloMax 4 micron, water shedding/separating filter media. 11.5" total length x 2.5" diameter = 600cc total in-side capacity (NASCAR limit) with over 900psi burst presure (NASCAR specification). -8 AN (ORB) fittings/ends which is competition approved for "all" NASCAR series (including Sprint Cup).
List is $255 on the setup with replacement filter cost of $39.99
The Flomax 350 (This filter can be mounted in any direction, down, sideways, upside down, and does not effect flow)
Fuel flow = 300GPH and filtration efficiency of FloMax 4 micron with 183sq. inches of filter media. Ports are -8 AN (ORB) multi-directional with 2 IN x 2 Out and comes with -8 to -6 reducers if needed. Clear anodized base. // Measurements: Height: 4.75" x Width: 3" x Depth: 3.75" x Weight: 24oz x Burst: 250psi. The street rodder and racer favorite. Uses replacement spin-on filter/water separator # RF500.
Retail pricing of $155.95, replacement filters of $24.99
The Flowmax 500 (This filter can be mounted in any direction, down, sideways, upside down, and does not effect flow)
FloMax Fuel flow = 300 GPH / Filtration efficiency = 3 micron with 579sq inches of filter media. Ports: -12 AN (ORB) multi-directional; 2 IN and 2 Out. Black anodized base. // Measurements: Height: 8.00" x Width: 3.75" x Depth: 5.00" x Weight: 45oz x Burst: 250psi. Race boat and racer needing extra capacity favorite. Uses # RF500M repleacement spin-on filter.
Retail of $187.95, replacement filters of $24.99
Beef
513-478-1965
Heres a small vid Rick did at a shop.
https://www.youtube.com/watch?v=DxhkSwnrqkQ
Available with an inline type, and spin on filter design, these filters do a great job.
Spoke extensively with Rick Rollins the owner of FST and he really has us sold on the product.
The inline Flowmax 700
In-line fuel filter using FloMax 4 micron, water shedding/separating filter media. 11.5" total length x 2.5" diameter = 600cc total in-side capacity (NASCAR limit) with over 900psi burst presure (NASCAR specification). -8 AN (ORB) fittings/ends which is competition approved for "all" NASCAR series (including Sprint Cup).
List is $255 on the setup with replacement filter cost of $39.99
The Flomax 350 (This filter can be mounted in any direction, down, sideways, upside down, and does not effect flow)
Fuel flow = 300GPH and filtration efficiency of FloMax 4 micron with 183sq. inches of filter media. Ports are -8 AN (ORB) multi-directional with 2 IN x 2 Out and comes with -8 to -6 reducers if needed. Clear anodized base. // Measurements: Height: 4.75" x Width: 3" x Depth: 3.75" x Weight: 24oz x Burst: 250psi. The street rodder and racer favorite. Uses replacement spin-on filter/water separator # RF500.
Retail pricing of $155.95, replacement filters of $24.99
The Flowmax 500 (This filter can be mounted in any direction, down, sideways, upside down, and does not effect flow)
FloMax Fuel flow = 300 GPH / Filtration efficiency = 3 micron with 579sq inches of filter media. Ports: -12 AN (ORB) multi-directional; 2 IN and 2 Out. Black anodized base. // Measurements: Height: 8.00" x Width: 3.75" x Depth: 5.00" x Weight: 45oz x Burst: 250psi. Race boat and racer needing extra capacity favorite. Uses # RF500M repleacement spin-on filter.
Retail of $187.95, replacement filters of $24.99
Beef
513-478-1965
Heres a small vid Rick did at a shop.
https://www.youtube.com/watch?v=DxhkSwnrqkQ
