getting a t-trimmed 2012 to hook

[xxbmxlsxx]

Waiting on my plugs which hopefully show up today so we can finish the tune so went ahead and finished up the suspension. Car has steeda ultralite springs, steeda race panhard bar, steeda race lower control arms, steeda race upper, bmr sway bar relocaters, bmr control arm relocaters, qa1 double adjustable rear shocks and 15x10 racestars with a 28x10.5 et drag slick.
Most of the stuff before install

Car has jba 1-7/8 longtube into 3" x to 3" flowmaster hushpower catback

Hopefully well be able to finish the tune then run it tonite at gateway raceway here in st Louis. Look for the midcoast performance cars and rig if your out there

 

[Bad Intention]

Looks like you have it covered. Should be able to dial the suspension in nice with all the adj. parts. How much boost do you plan on running?

 

[xxbmxlsxx]

should be about 10lbs. suspension has been adjusted to kill mode, or maybe break something mode. lol

 

[Bad Intention]

suspension has been adjusted to kill mode

Here i fixed that for you. Should run great on 10lbs.

:burnout:

 

[99cobraUgotbit]

Awesome set up!!! Sweet drag wheels and tires. If I Never got married twice and divorced twice I would be where your at now.

 

[BigMackCoyote]

I want those wheels bad. I'm running 10lbs and its a bitch to get to hook

 

[98ss88mm]

I have a similar set up... waiting to see what you make here

 

[xxbmxlsxx]

blower belt came apart before we even did the wot pulls. gay. gonna check into why tomorrow

 

[jymboslice]

what length did you set your upper control arm too?

 

[xxbmxlsxx]

i think it was 10 something but i could be wrong since im so scatter brained. ill measure it while we have it in the air this weekend. last few days have been a blur

 

[98ss88mm]

blower belt came apart before we even did the wot pulls. gay. gonna check into why tomorrow

that sucks! Mine is going on the 23rd. Are you looking for 650~?

 

[beefcake]

make sure you have all the spacers in the right spot on the brackets.

for belt lenght, you want the tensioner almost topped out, if you top it out completely, it will snap belts

 

[try03venom]

Awesome set up!!! Sweet drag wheels and tires. If I Never got married twice and divorced twice I would be where your at now.

i'm in that club too!:beer:

 

[xxbmxlsxx]

few more pics

boostapump

lower control arms

jba longtubes before i installed them

thanks to beefcake for the deal on the darkstars! great guy to deal with and talk to. new belt is on. seems one the of the lower bolts thats holds the headunit wasnt tight possibly allowing enough movement for the belt to eat a rib. we will see in the next few days when we start wot tuning. for now all i can say is that bringing this up on the 2step at 5k sounded gnarly!

 

[BV600]

LOOKS SICK! what size fronts did you go with? Also how did you wire your BAP?

 

[xxbmxlsxx]

17x4 with m&h 185 radials. Bap is powered by the purple coming from the front of thecar. Output from bap goes to the purple going to fpdm. Grounded to fpdm mount bolt. Fuse 13 underhood is replaced with 30amp fuse. Gonna try this way if it doesn't work well ill install a relay

 

[beefcake]

your welcome!

 

[99cobraUgotbit]

What wheel sizes for the back and what size slicks did you get. Looking to ditch the DR. Thanks

 

[venumb]

Who is tuning your car? Are you running at Gateway next week? If so, what day? Shoot me a PM if you like, I go over and watch from time to time.

 

[xxbmxlsxx]

15x10 wheels with 28x10.5 stiff wall et drag slicks. car is at midcoast performance in st charles(right by fastlane) where i work and kurt borton is going to tune it. i have to wait for an updated blower bracket from vortech though now since mine was eating belts. so it will be another week or so.