Overall it was not too bad, getting the airbag out is a pain depending on the tool you use. But the swap is pretty straight forward (I took about a hour and a half).
I didn't notice until after I had the other wheel off that mine seems to have two defects, there is a little chip in the leather bottom, not a big deal but it is there. There are also lines on the bottom leather as well, a bigger issue but I will live with it, I don't want to wait another 2-3+ months for another. I might get a 350R wheel anyways so I will go from there.
For the money this might be the best mod outside of exhaust, the wheel it just that nice. The stock wheel should fetch decent money was well so at $170~ this mod is one of the best you can do.
If anyone has any questions on the wheel or install let me know!
does anyone have any inside info on these as of now? I am having a hell of a time finding one let alone finding one for less than 300$ I am not concerned whether "R" model or not. I just want one! haha any help would be appreciated!
Cannot order them anymore. Ford put a stop sale til the 1st of the year at least, word on the street is they have VIN association now (meaning you need a 350 VIN to order a wheel)
Cannot order them anymore. Ford put a stop sale til the 1st of the year at least, word on the street is they have VIN association now (meaning you need a 350 VIN to order a wheel)
I have seen people "think" a Vin will be needed for the R parts but I haven't seen anything official (I am praying for a R wheel ). The regular 350 stuff shouldn't need a Vin. I think there is just a massive backorder right now. You might want to ask some of the venders about it my CO friend.