Headlights--seam has cracked

funair02

New Member
Established Member
Joined
Jun 14, 2004
Messages
402
Location
Tampa Bay USA
Hi all
Well Im a little irked that the seam in the drivers side headlight has cracked open and allowed water to get in there :fm:

I was wondering if there was a warranty on these headlight enclosuers?? Could this be a saftey problem that would be taken care of under Federally mandated warranty?? Like cat converters and like windshields in FL??

If not, whats the price of a new enclosure

thanks all ;O)

Joe
 

throttle jockey

Stock Block 11 Sec. Club
Established Member
Joined
Apr 8, 2007
Messages
1,660
Location
Whale's Vagina, Ca
You may be able to put it in the oven on low heat so that you can separate the lens, then re-seal with clear silicon adhesive. This is how I color matched my tails. I believe some have done the head lights the same way, that's why I say it may be possible.
 

Exdecuk

New Member
Established Member
Joined
Oct 24, 2007
Messages
309
Location
London England
Open them up with a hot air gun rather than the oven it only takes a couple of minutes, then either paint the insides prior to sealing with a silicone sealer or just seal up again as is.
 

RIDE THE

Shake & Bake
Established Member
Joined
Jan 17, 2006
Messages
5,766
Location
NORTHERN VIRGINIA
No Federal Warranty on them. 3/36 just like everything else.

I can check for you tomorrow on the price and I'll PM you.

02 drivers headlight assembly correct?
 

Users who are viewing this thread



Top