heat exchanger hose routing

[mustanglime69]

anybody have a pic of the heat exchanger hoses?i installed a fluidyne and it wont prime itself now,i can get the air out and it will pump but i let the car sit overnight and it wont prime itself,pretty sure its gotta do with the way i have the inlet on the pump facing

 

[mustanglime69]

anyone?

 

[Jefe]

Found this

Wiggle the electrical connector on the pump. I had to keep pressure on mine to get it to fully run.

 

[mustanglime69]

hmmm ok that pic helps me a lil

 

[03cobra#694]

No pics, but...
The short mesh hose with an outlet near the blower goes directly to the Resivoir. The hose coming out of the resivoir MUST go directly to the Pump. Pump MUST be fed from resivoir. From pump into the H/E, out of the H/E and back into the Intercooler under the blower.

 

[mustanglime69]

i know where the hoses go but i turned my h/e pump and cant remember which way the inlet faces? up down,sideways?

 

[Jefe]

Not many photos on this site but these might help:

http://www.svtperformance.com/forums/engine-tuning-214/702347-intercooler-pump-cleaning-how.html

Pretty sure this is from a lightning, very similar setup though

 

[mustanglime69]

thanks!

 

[mustanglime69]

can someone look at theres and tell me which way the inlet is facing? towards ground or up or sideways,thanks

 

[Jefe]

Most of us have our bumpers installed so we cant. Finally found a good pic for you

 

[mustanglime69]

sweet,perfect thanks