Help needed - need pics of IAT2 sensors on Eaton/KB/Whipple

[Soap]

From your installations or if you just have stuff waiting to be installed, can you please post pics of Eaton/KB/Whipple blowers with the IAT2/MAP sensor installed. I am looking for a pic of the bottom of the sensor as it would sit in the lower intake.

Please see this thread (post #83) for background info.
https://www.svtperformance.com/forums/threads/high-boost-tvs-guys-in-here-please.1147499/

Thanks in advance.

--Joe

 

[Soap]

I found a picture of the sensor mounted on an OEM Eaton and a Whipple. As I suspected the IAT2 sensor protrudes from the mounting plate into the lower intake.

Anyone have a picture of a KB?

--Joe

 

[GodStang]

I found a picture of the sensor mounted on an OEM Eaton and a Whipple. As I suspected the IAT2 sensor protrudes from the mounting plate into the lower intake.

Anyone have a picture of a KB?

--Joe

I do. I have pics from just about every angle. I will post up when I get a signal.

 

[GodStang]

Hope this helps. I will look for my 2.8LC.

 

[Soap]

Do you have one with the MAP sensor installed? So I can see if the sensor extends into the lower intake.

--Joe

 

[GodStang]

Do you have one with the MAP sensor installed? So I can see if the sensor extends into the lower intake.

--Joe

What other sensor? All three pictures have the IAT2 sensor installed. Not sure what other sensor there is on that plate.

 

[Soap]

I'm sorry I'm on my phone and the third pic didn't load. That is perfect, shows the sensor into the lower.

--Joe