i got a question what all do i need to put 03 04 cobra heads on my 96 cobra ?

[chillicobra]

im 17 and drive a 96 cobra . im wantinng to do a 03 04 head swap and fr500 cams but what all do i need to do the 03 04 head swap ? please reply

 

[CobraJazz]

If you look up at the top of the the sn-95 section front page there is a list of how-to threads that have a lot of helpful info. There is a thread there about swapping to c heads. That should have all the info you need.

Welcome to the forum!

 

[MLS]

Cylinder Heads x2 ,intake manifold, exhaust manifolds, throttlebody,throttle cable, cruise cable if you want cruise control,ex manifold gaskets 2x head gaskets, 2x cyl head bolts,intake manifold gaketsx2 new fuel rail or modify yours + custom tune. Thats pretty much it, im doing this swap soon and have been stocking up on the parts. Dont forget the torque wrench and six pack.

 

[chillicobra]

some body said something like you have to get a new timing belt cover ?

 

[bmorecobra]

some body said something like you have to get a new timing belt cover ?

You can use your existing 96-98 timing cover with no problem. :thumbsup:

 

[97LaserRed]

what are the difference between 03-04 cobra heads and 03 -04 mach1 head and 96-98 cobra?


edit: found what I was looking for.....

 

[chillicobra]

You can use your existing 96-98 timing cover with no problem. :thumbsup:

how much you think it would cost

 

[PSUCOBRA96]

you also do not need to change the manifolds, your stock ones will work fine