Injectors, fuel pumps etc

[MJG]

Built shortblock, stage 2 comp cams/ported heads.
Longtubes, Ported eaton, 8# lower.

That pretty much sums up my build for now, would like to go bigger,but buying a house within the year therefore my chick has limited me to this list.

Would I require 255s and 60# injectors just yet?

I would assume with the ported eaton and 8# lower with cams I should get to the 450-475 mark.

Plan on keeping the truck this way for a few years as we all know a new mortgage means beans from a can every night for dinner.

Thanks

 

[Z7What]

I would for insurance reason! Stock injectors/pumps are good for about 450 RWHP BTW.

Wayne

 

[Tazman1]

450 hp on stock injectors......LOL....I guess I had some super sucker 42 # ers then...

I was able to get 500 rwhp out of my old setup with the stock injectors...

Oh I posted on the other site too....

 

[lightning25]

matt i don't eat just beans for dinner!!! lol

i was told to go with injectors and pumps after 450ish

Sean

 

[inuswo]

I started leaning out on my break in tune with the 42#ers with a built block, TF44cc heads, custom cams, stock eaton, lt's, and a 6# lower. The tune was set to give like 11.2 to 11.6 af on 91. I bought 60# flowmatched decka's and 2 255 walbro's, hopefully will be having them installed and get my final tune this weekend. Rather be safe than sorry, if you're near the 450 mark I'd just get them now and get it overwith.

 

[MJG]

Best deal going for flow matched?