Maybe I'm searching the wrong terms, but I can't find a torque value for the stock rear differential support bushing bolt. I believe its an 18mm bolt. Can anyone help me out?
IRS Rear Differential Bushing Torque
- Thread starter lxsteed
- Start date
IIRC it's a 12mm bolt with an 18mm hex head. I have also been unable to find the torque spec on this so I just crank them down with a 1/2" ratchet. If you have it apart and you're reassembling I would put a good amount of blue removable Loc-Tite thread locker on it.
FWIW
:thumbsup::coolman::beer:
You're right, it is an 18mm head. Thanks for the input Bruce!
all I could find was rear diff to isolator at rear 76ft/lbs
That's it. 76 lb-ft. Fronts take 52 and back takes 76. Section 205-02C of the workshop manual.
Users who are viewing this thread
