Is the 2013 lower front spoiler a direct bolt up to a 12?

[Canadian Kona]

Ok thanks I'll send him a pm now

You wont be disappointed, best prices around!

 

[charged87]

Just ordered mine from FORDSVTPARTS a member on here and should have it next week, so from what I understand you have take all the existing bolts that hold the 2010 lip and the 13-14 3 piece lower lip clips on it using the existing bolts to secure it?

 

[lsp408]

I bought new bolts for the install. The old bolts have bigger washer which don't fit in the new spoiler.

You can remove middle 6 bolts first to install center piece then 3 more bolts per side.

 

[charged87]

I bought new bolts for the install. The old bolts have bigger washer which don't fit in the new spoiler.

You can remove middle 6 bolts first to install center piece then 3 more bolts per side.

Where did you get them?

 

[lsp408]

Tousley

I ordered 3 piece spoiler, all the hardware and supporting brace

 

[ZX6Ray]

UNANSWERED QUESTION: Does this bolt onto the 10-12 GT500 stock chin spoiler or do you remove the stock chin spoiler and replace with this 3 piece???

Is this the correct part? I want to order it but it only says 13/14? http://www.ebay.com/itm/13-thu-14-Mustang-Shelby-GT500-OEM-Genuine-Ford-Parts-Front-Lower-Air-Deflector/171253680742?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D27538%26meid%3D12e17e5709834d29afb6930b96a888d6%26pid%3D100005%26prg%3D11353%26rk%3D2%26rkt%3D6%26sd%3D251353976031&rt=nc

 

[GT Premi]

How is that an unanswered question? It's been answered a million times on this board. Yes, it fits the '10 - '12 GT500. Yes, it bolts directly onto the existing splitter. Yes, that is the correct part. The reason the listing says '13/'14 is because those are the model years that the lower splitter was introduced. The front fascias and front splitter are identical from '10 thru '14.

 

[ZX6Ray]

How is that an unanswered question? It's been answered a million times on this board. Yes, it fits the '10 - '12 GT500. Yes, it bolts directly onto the existing splitter. Yes, that is the correct part. The reason the listing says '13/'14 is because those are the model years that the lower splitter was introduced. The front fascias and front splitter are identical from '10 thru '14.

Sorry! I searched and this is the only relevant thread that came up and I've never seen it talked about until now. The previous posters weren't clear about how it attaches, only stating it will make sense once you take the stock one off. I appreciate the help as I want to be 100% confident I am buying the right part. Thank you!

 

[GT Premi]

You don't need to take the stock one off. Not sure why people were even suggesting it. Just get the front end up on ramps or jack stands, take the bolts out of the stock splitter (it'll still be attached by some super strong 3M tape), attach the lower splitter pieces, enjoy.