good morning. I am just about done wrapping up my KB 2.6 swap. I am having difficulty with the EGR tube! I wrestled the tube for about 2 hours last night. I gave up as I lost my voice from all the swearing.
Any tips?
Any tips?
Never worked on a KB but if you left the EGR valve bolts loose and have the EGR tube loose at the header/manifold it should fit. If not you have major problems.
I've had to tweak my EGR tube over the years for my TVS's and my headers, I just put a massive box end wrench over the tube and use it to bend the tube.
Godstang, the egr valve is installed. I left the bolts a touch loose to give me some give. I cannot attach the EGR tube to the EGR valve. I am just a few hairs off. I am trying hard not too bend too hard as I did not want to make it worse.
CJ428mach, I did not think about loosening the tube at the manifold! DUH That should do the trick as I am pretty close.
After 5 hours of swearing, the EGR tube is in. Time to go to sleep.