Leaving power on the table?

04cobra13

Active Member
Established Member
Joined
Feb 19, 2007
Messages
3,806
Location
rowland hts
Hey guys, so I got a 2.6 kb ,stock Injectors stock mayf,bap and a big pulley ,makes about 11-12psi. Would adding 60lb injectors and a sct maf free up some power possibly ?
 

Bdubbs

u even lift bro?
Established Member
Premium Member
Joined
Jan 8, 2010
Messages
16,092
Location
MN
Those would be "supporting" mods to run a smaller pulley and increase boost.

Is your engine stock and what fuel are you running? You should be able to run 17-18psi on 91-93 octane with a good tune all day long.

Sent from my moto g power (2021) using Tapatalk
 

cobracide

Well-Known Member
Established Member
Joined
Aug 23, 2002
Messages
9,245
Location
Somewhere in 1945
Ya, crank the boost up and upgrade to 60s at least. 19# on E85 is easy with a 2.6kb, putting you close to 700.

Eh, Cali.. Surprised they didn't flag you with that KB.
 
Last edited:

04cobra13

Active Member
Established Member
Joined
Feb 19, 2007
Messages
3,806
Location
rowland hts
Those would be "supporting" mods to run a smaller pulley and increase boost.

Is your engine stock and what fuel are you running? You should be able to run 17-18psi on 91-93 octane with a good tune all day long.

Sent from my moto g power (2021) using Tapatalk
Stock motor 91 octane.
 

Users who are viewing this thread



Top