If it involves drilling into the lower door (like I saw on previous posts), I won't do it. But, if the OP did it by not drilling into the door, then I would be interested on how he did it.
I don't get a lot of time during the week to get pics so sorry for the delay but all I did was move the mirrors all the way in so you have more room at tip of mirror then take them off and drill a .75 hole in farthest flattest place and make sure mirror clears and run the wires from the led through bottom and side to where factory connector and two top outside wires purple and black on drivers side purple and black w/ yellow tracer on pass side it's easy! Burnout!!!