Just seeing what people run these without issues til ..... last motor v3 3.6 pulley on e85 about 700whp 11 psi ..... all seemed decent .... this motor with gen 2 heads 18 mani flows a little better so 3.48 pulley about same 11 psi (somewhere between 750-770 whp maybe?)..... having a little hiccup on lower rpm WOT tip in and bypass valve is in question as a possibility to see if it is the culprit ( i do not think so )
but wanted to see if anyone had any input ... this is the bypass valve the one that comes stock on the kits
thanks
but wanted to see if anyone had any input ... this is the bypass valve the one that comes stock on the kits
thanks