I am swapping a TR6060 into my 2013. I was wondering if anybody has done this, and might have some wiring diagrams available? I searched but didn't find much useful info. Any help is appreciated.
BUMP. going to be purchasing a TR6060, clutch, and DS soon and want to know what else I need, and what issues I'll run into.
the crossmember will come with the trans. how bad will it be if I was to leave my 3.31 rears? the reason i'm swapping is for the longer gears. what what I want. The car is strictly a roll race car, so that's the point.
Are the driveshafts the same length, and are the clutches compatible? I have a buddy who just snagged a TR6060 out of a 2012 GT500 for his 2012 Boss.
I personally would of just had my MT-82 rebuilt and beefed up. Swapping to a T-56 isn't a bad option but you have to run much steeper gears due to the transmission gearing being different from the MT-82. I won't run above a 3.73 myself. I also read an article on another forum about a guy doing a TR-6060 swap. I only remember reading about problems. Mainly electrical ones. Either way, good luck.