My Terminator build

[GRod214]

So the terminator has always been one of my all time favorite cars. I decided I was going to build one a few months ago so set out to pick one up for 17 k mostly stock with a ported blower and after market pully and full bassani exaust. It made 402 on the baseline pulls. Since I started going crazy on the build.
Below is a list of items installed all at the same time what do you think it will make?
Kenne Bell 2.2
2.75 pully
Jlt intake and accufab tb
Head cooling mod

Fuel
Fore return style fuel system with dual pumps 465 I believe
Id1000s
E85

Cooling
Fluidyne front mount
Upgraded pump for after cooler
Moroso expansion radiator and after cooler box

Drive train
Stage 3 spec clutch 26 spline and input shaft
Irs brace

Think this does it might be misc items

Pics of the build for you all to enjoy

What do you think of the build so far?

Sent from my Pixel XL using the svtperformance.com mobile app

 

[BlksvtCobra01]

Awesome build. Looks clean. Love SB. Did you put the brace on? I would've went with the diff cover jmho. Keep us updated.


Sent from my iPhone using Tapatalk

 

[GRod214]

Yeah the diff cover. I am hoping to get it into tuning over the next few days can't wait to see what it makes. Pretty stoked.

Sent from my Pixel XL using the svtperformance.com mobile app

 

[Skitzerman]

Very nice build and great looking Cobra.

 

[TooFast98Cobra]

600rw + is my guess

 

[TK1299]

606/568

 

[Iamchris]

Nice job. I'm kind of curious though. I don't know what the 2.2 should make on E-85, I would have guessed around 650+ depending on the tune.

Either way, you said the baseline pull was 402 but you had a pulley, port and full exhaust, but those numbers would be low for even just a pulley. Does your dyno run on the low side? Otherwise you might have a problem somewhere.

 

[GRod214]

You know it ran that on 2 different dynos as I wanted a true baseline. I feel there was something up with the tune and for some reason it was only making about 8 lbs of boost. I chucked it up to it having headers and some boost loss due to this. I didn't investigate it any further as I knew I was changing alot of things.

Sent from my Pixel XL using the svtperformance.com mobile app

 

[GRod214]

I thought it was low also btw and I am hoping for numbers north of 650. On this first mini build.

Sent from my Pixel XL using the svtperformance.com mobile app

 

[The Abyss]

Great looking car!

 

[1Kona_Venom]

Projects are fun, and cheap, when it is someone else's lol

subbed

 

[badmpg03]

Sweet setup, congrats on purchase.
I hit 644 /600 on the 2.2 e85 with 2.75 pully, 19 psi, About 22 degrees of timing if it helps
Highest I have heard of on stock motor is 670 ish over spinning to 21 psi with stepped long tubes.

 

[cj428mach]

Since you haven't started tuning yet you still have time to go with a 2.3l blower. You'll make more power with less heat.

 

[BlckBox04]

I made 600 /580 on the 2.2 with pump gas 93 octane with 2.75 pully, 17 psi, About 22 degrees of timing also

 

[oneof185]

Nice, looks like pretty good deal for 17k too.

 

[03' White Snake]

Good list of supporting mods. Seems you are doing it right once. After you get used to it after a while, Then you can swap on a bigger blower and let it eat. On corn, you should make around 650 or so. With a bigger blower.... 700 plus easy with those other mods.

 

[GRod214]

So I had tuning started on the car but for some reason the Mafia took a crap couldn't get the car over 5000rpm it's made 550 on pump at this rpm level. Has this happen to anyone? I am more than likely going to be getting an sct maf. Any suggestions?

Sent from my Pixel XL using the svtperformance.com mobile app

 

[GRod214]

So I ended up going to with an sct 3000 the car has a 93 octane tune on it right now. Tuning for e85 now. It made 605 this far on pump regular pump.



Sent from my Pixel XL using the svtperformance.com mobile app

 

[GRod214]

Sent from my Pixel XL using the svtperformance.com mobile app

 

[BlksvtCobra01]

Congrats nice number.