Hey everyone!
So it's been about 6 years since I sold my last Terminator, and I've finally gotten back into one and hope to keep this one for.. I don't know.. Forever? It's a 04 Screaming Yellow, and as of today (03/27/2024), it has 32,000 miles and running strong. (Knock on wood)
But anyways.. here she is as she sits now!
I purchased her back in October while I was overseas, and couldn't have been happier when I arrived home to see she looked like she just rolled off a showroom floor.
So before I go into the modifications let's talk about my current plans/projects for the car:
1. Replace the entire Mach 460 system with upgraded audio
2. Replace the amalgamation of exhaust work done with manifold-back Bassani
3. Suspension overhaul.. Shocks, struts, etc
4. Begin the quest for 700whp and be happy (Hopefully... lol)
Now, the mod list.. everything in GRAY came on the car when I purchased, WHITE is what I've installed / had installed, and YELLOW is my upcoming plans!
Modifications:
Engine / Fueling:
- Kenne Bell 2.4l
- JLT Carbon Fiber Intake
- BA2600 MAF
- Catch Can (Unknown Brand)
- Upgraded Heat Exchanger
- Focus 255 LPH Twin fuel pumps
- 60# Injectors
- MMR Oil Filter Relocation Kit
- Lund Tuned (Unknown power numbers, it was remote tuned. Will be getting it on the dyno in the near future)
- Fluidyne 3 Core Radiator (03/15/2024)
- Harpell Auto Fab Reservoir Tank (4/10/2024)
- Lethal Performance Return Style Fuel System
- ID 1300s
- Retune with either Lund or Kurgan
Drivetrain:
- Mcleod RST Clutch
- 26 Spline Input Shaft
Brakes:
- Drilled Slotted Rotors
Exhaust:
- Bassani O/R X Pipe
- Pypes M80 Mufflers
- Borla Tailpipes
- Bassani 3in CBE
- Bassani Catted X Pipe (Maybe...)
Suspension:
- Unknown Brand IRS Bushing kit
- Welded Subframe Connectors
- H&R Sport Springs (2/26/2024)
- Maximum Motorsports Camber Caster Plates
- Shocks and Struts (Haven't decided on which ones yet)
Exterior / Wheels:
- Smoked Taillights
- Saleen Rep Wheels 18x9 / 18x10 (Replaced)
- Carbon Fiber Wrapped Roof
- CCW 40 Bolt Classics 18x9.5 / 18x11 (02/15/2024)
- Toyo R888R Rears (02/15/2024)
- MRT Hood Struts (Awaiting Installation)
- Aeroflow Dynamics Side Skirt Extension V1
Interior:
- CM Components Rear Seat Delete
- Dual Guage Cluster w/ Aeroforce Guages
- Billetworkz custom Titanium Shift Knob (02/05/2024)
- SCT X4 (02/05/2024)
- Kicker CS Component Speakers (Awaiting Installation)
- Kenwood Excelon DMX809S
- Kicker 47KEY 4 Channel Amp
- Kicker CS Rear Speakers
- AEM UEGO Wideband
- AEM Fuel Pressure Gauge
- OvertakeAuto CF Steering Wheel
So that's everything for now! I plan to use this to 1. keep myself honest on what I want to do with the car, and document it along the way and 2. to show everything I'm doing to it and whatever issues I run into / fixes for them to maybe help someone else along the way who might run into similar things!
So it's been about 6 years since I sold my last Terminator, and I've finally gotten back into one and hope to keep this one for.. I don't know.. Forever? It's a 04 Screaming Yellow, and as of today (03/27/2024), it has 32,000 miles and running strong. (Knock on wood)
But anyways.. here she is as she sits now!
I purchased her back in October while I was overseas, and couldn't have been happier when I arrived home to see she looked like she just rolled off a showroom floor.
So before I go into the modifications let's talk about my current plans/projects for the car:
1. Replace the entire Mach 460 system with upgraded audio
2. Replace the amalgamation of exhaust work done with manifold-back Bassani
3. Suspension overhaul.. Shocks, struts, etc
4. Begin the quest for 700whp and be happy (Hopefully... lol)
Now, the mod list.. everything in GRAY came on the car when I purchased, WHITE is what I've installed / had installed, and YELLOW is my upcoming plans!
Modifications:
Engine / Fueling:
- Kenne Bell 2.4l
- JLT Carbon Fiber Intake
- BA2600 MAF
- Catch Can (Unknown Brand)
- Upgraded Heat Exchanger
- Focus 255 LPH Twin fuel pumps
- 60# Injectors
- MMR Oil Filter Relocation Kit
- Lund Tuned (Unknown power numbers, it was remote tuned. Will be getting it on the dyno in the near future)
- Fluidyne 3 Core Radiator (03/15/2024)
- Harpell Auto Fab Reservoir Tank (4/10/2024)
- Lethal Performance Return Style Fuel System
- ID 1300s
- Retune with either Lund or Kurgan
Drivetrain:
- Mcleod RST Clutch
- 26 Spline Input Shaft
Brakes:
- Drilled Slotted Rotors
Exhaust:
- Bassani O/R X Pipe
- Pypes M80 Mufflers
- Borla Tailpipes
- Bassani 3in CBE
- Bassani Catted X Pipe (Maybe...)
Suspension:
- Unknown Brand IRS Bushing kit
- Welded Subframe Connectors
- H&R Sport Springs (2/26/2024)
- Maximum Motorsports Camber Caster Plates
- Shocks and Struts (Haven't decided on which ones yet)
Exterior / Wheels:
- Smoked Taillights
- Saleen Rep Wheels 18x9 / 18x10 (Replaced)
- Carbon Fiber Wrapped Roof
- CCW 40 Bolt Classics 18x9.5 / 18x11 (02/15/2024)
- Toyo R888R Rears (02/15/2024)
- MRT Hood Struts (Awaiting Installation)
- Aeroflow Dynamics Side Skirt Extension V1
Interior:
- CM Components Rear Seat Delete
- Dual Guage Cluster w/ Aeroforce Guages
- Billetworkz custom Titanium Shift Knob (02/05/2024)
- SCT X4 (02/05/2024)
- Kicker CS Component Speakers (Awaiting Installation)
- Kenwood Excelon DMX809S
- Kicker 47KEY 4 Channel Amp
- Kicker CS Rear Speakers
- AEM UEGO Wideband
- AEM Fuel Pressure Gauge
- OvertakeAuto CF Steering Wheel
So that's everything for now! I plan to use this to 1. keep myself honest on what I want to do with the car, and document it along the way and 2. to show everything I'm doing to it and whatever issues I run into / fixes for them to maybe help someone else along the way who might run into similar things!
Last edited: