Need help finding some gaskets and hoses

[MattACK]

I have my cobra in the shop for some maintenance and had them remove the blower so I can send it off for porting. When removing the I/C fluid block off the lower intake, the gasket for it and the o-rings on the tubes became damaged along with the vacuum line that runs to the bottom of the lower intake when the blower was removed. I expect this with car that has 95k miles on it, so I need to know where to get these. Can't find them on Rockauto and don't want to get extorted by the dealer.


Any advice on where I should look? Thanks,

--Matt

 

[Blueline]

Call Steve from Tasca Ford, he is a vendor on here and will take care of you.

 

[flyby763]

I just bought an entire pcv hose setup brand new off ebay for like 45 bucks. Not sure if Tousley or tasca can beat that. They can definitely get the Orings. I bought the Orings and gasket from Levittown ford online.

 

[MattACK]

Cool, thanks fellas

 

[Tractionless1]

Ditch the crappy OE IC tubes for the Cobra Engineering billet pieces. You'll never worry about them leaking nor blowing out under boost again!