I forgot to buy the boss302 install kit for my cobra jet setup. Does anyone know the actual parts needed besides the 2ft hose? I see that we need a bolt, what size because LMR won't give me their specs lol
I know. I went out and bought 2ft of 3/8 fuel hose with clamps but now I'm confused. Anyone have a picture of how they routed it and where? What about the stray connector by the throttle body?
Take the OEM clamp off the hose, you won't be using it, get a worm clamp. After that the hose angles at a 90* down then 90* back, which lets you screw it down. lemme check my phone for pics. Also don't re use your stock TB bolts, those suckers are waaaaay to long and look ugly.
autozone. mark the threads with a sharpie, take it off then go to auto zone or any autocrats store. find the right thread and length that goes a little past where you marked and buy a pack, which usually comes with 4.
the valve is hanging off the wires and the hard plastic line, been that way for months with out issue. You can mount it if you can make a bracket to help it reach but letting it hang works