Need to know what to GAP at

[thorntonSVT]

So.. ive got my S/C off and cleaned the intercooler. I have new plugs coming from Amazon, no idea when they will be here since they arent shipped yet, maybe next week? The problem is I need to change them now since I have the sc off. As you guys know its a pain to do it when its not off. Im going to go to autozone tomorrow and get the plugs then when I get the ones from amazon I'll take them to autozone. I need to know what to gap them at. Mods are listed below plus 2.80 upper pulley. No idea what to gap them at :shrug: If I were to guess I would say 34. Any information and/or suggestions would be greatly appreciated!!

 

[EnglishAdam]

Here you go

 

[bgstew6]

.038 and you should be fine if all you have is the 2.80 upper

 

[mcarbine]

Yup what Stew said and if you add a 6lber down the road you can always tighten the gap to around .034

 

[throttle jockey]

+1 with Stew and mcarbine.

 

[SWThomas]

I'd also go with Stew's recommendation.

 

[Fade 2 Black]

Yup. IIRC that's in the FAQ page also. ;-)