new bolts for blower question

[SVTCOBRAKID]

Hey guys, quick question. Where do I get the new bolts to attach the blower back onto the car. The guy I want to install it doesn't want to chance using the stockers... So I ned new ones. Thanks guys

 

[birch]

Used the stockers to put mine back on..no problems.

 

[U1arunit]

Use the stock bolts. I have done it that way on the last 6 blower swaps.

 

[Screamin Cobra]

I used the stock bolts when I swapped my Eaton to a ported Eaton when I was running the stock blowers. My buddy did the same, no problem here.

 

[SVTCOBRAKID]

The guy won't do it with the stock bolts, so can anyone direct me where to get new ones. Thanks

 

[IronTerp]

The guy won't do it with the stock bolts, so can anyone direct me where to get new ones. Thanks

Best bet would probably be Steve at Tousley Ford. He's a vendor on this site who I believe has a stickied thread at the top of this Forum where you can get his contact info.

Here's his thread:

http://www.svtperformance.com/forums/showthread.php?t=193978

 

[SVTCOBRAKID]

Thanks a lot iron!

 

[dynobobstieg]

Call us with your mailing address and I can send you some.
636-949-2275
BTW the stock ones will work fine.

 

[Sonic03inSC]

Stock one for the whipple work ok I did break one using crappy Tq wrench thoe. For can get you replacments or napa gave me some for free.