Next Set of Mods: Cooler Temps or More Power

[usafimj]

Future goals is to add a 13-14 TVS/Gen II-R. Budget is about $1000. Current mods in sig.

#1 VMP Triple Pass H/E & 3x Tank (keep things cooler)
#2 VMP 67mm or Monoblade TB & Elbow (little more power)
#3 Keep saving for the TVS but then I'll need Injectors and BAP which is more money (Still need #1 to take full advantage)

- Israel

 

[gulfcoastlifest]

Future goals is to add a 13-14 TVS/Gen II-R. Budget is about $1000. Current mods in sig.

#1 VMP Triple Pass H/E & 3x Tank (keep things cooler)
#2 VMP 67mm or Monoblade TB & Elbow (little more power)
#3 Keep saving for the TVS but then I'll need Injectors and BAP which is more money (Still need #1 to take full advantage)

- Israel

First thing first #1 VMP TPH x 3 Res.w/ your choice of water wetter with distilled water or Royal Purple additive with distilled water.
Cooler operation is first.

Sent from my LGLS755 using Tapatalk

 

[gulfcoastlifest]

First thing first #1 VMP TPH x 3 Res.w/ your choice of water wetter with distilled water or Royal Purple additive with distilled water.
Cooler operation is first.

Sent from my LGLS755 using Tapatalk

I have the 2.3 Trinity TVS waiting on the shelf, looking for the good Injectors.

Sent from my LGLS755 using Tapatalk

 

[1Kona_Venom]

It would be best to do the blower, HE, Throttle Body, Inj all at once

I know, there's just no way around it cause you cannot have one, without the other. I wouldn't hassle with just a TB

 

[1st usa car]

tvs - you know u get more power but it is a better design --- so, it is kinda running cooler too

 

[rotor_powerd]

Heat exchanger will be the biggest improvement currently. I would just keep saving your money and do everything at once (Heat exchanger, TVS, fuel, etc.).

 

[GT Premi]

Cooling.
Suspension.
Weight reduction, preferably rotating mass.

 

[Pribilof]

+1 for heat exchanger. Mine made a huge difference on an otherwise stock car even in coastal San Diego (moderate weather).