On3 60mm TT kit. What else is needed?

[j.dd1]

What else would I need to purchase? What injectors should I buy and I plan on pairing it up with a BAP. is that all I need besides a tune?

 

[MattZ28]

Probably a torch and a TIG welder.

 

[j.dd1]

Probably a torch and a TIG welder.

I am well aware of the installation problems that may occur. I meant as in parts such as injectors and a bap.

 

[j.dd1]

Anyone?

 

[cb900f]

Anyone?

Depends on what your goal is. Injectors are a minimum. Probably a BAP is a good investment too. More info is needed on what your goal power is before anyone can say what you need.

 

[Kyle55]

Ceramic coat hot side, upgrade the intercooler, ID1000s

 

[cb900f]

Ceramic coat hot side, upgrade the intercooler, ID1000s

Why upgrade the intercooler? Just wondering...

 

[Kyle55]

that what i would do, its a not a top notch intercooler. may be wrong

 

[SCalla1384]

I'd worry about upgrading the bov and gates before the intercooler. Then the turbos. Then the intercooler.

If it were me, injectors, wastegates, bov I would upgrade

 

[wakebum2507]

you're going to want to upgrade the gates, at a minimum. those have been known to fail. and if/when those fail....

*bad things happen*

 

[truebluedevil02]

The ignorance in the thread is ridiculous, just sayin.

 

[blackbeast12]

One word "patience ".

 

[stretchb]

only educated thing said in this thread ^^^

 

[REDS197]

I put mine on with average tools and jack stands in my garage. Took my time and everything fit with some minor tweaks. I used all stock On3 parts.

All you need are 47's, a boost-a-pump, and a tune(r)