On3 Cobra VS 2.8 KB Cobra

xXAzureMach1Xx

Active Member
Established Member
Joined
Mar 23, 2008
Messages
1,322
Location
Pensacola FL
Nice :rockon:

Yea because even a gutted SN95 might be around 3200 pounds without driver, so probably 300-400 pounds difference (which is really a stretch) isn't going to make up for 200hp.

A gutted sn would be lower then that, Im 3350 without me with a eaton swap and full weight besides bigs and littles.
 

ModularSpeed

Suspension Guru
Established Member
Joined
Jun 1, 2007
Messages
929
Location
Florida
Before the 4R70W went in, the car weighed 2985.

WITH ME, it was 3180ish.....

Now it has an auto, so I will say 3200.
 

red9450

Active Member
Established Member
Joined
Dec 6, 2005
Messages
3,807
Location
NEPA
well, I don't know how your car runs at the track modular speed, but the one pass I did get in with my on3 70mm setup I went 11.1@131 on 17psi through a 6 speed. I'm sure the auto makes you faster even with less power..
 

BM1

New Member
Established Member
Joined
May 1, 2006
Messages
3,278
Location
$null
It was on a Mustang Dyno, if that helps clear anything up.

Plus you have an auto. It's hard to judge an auto car by its dyno number as they usually run much harder than the number they make.

Nice run and nice car.
 

ModularSpeed

Suspension Guru
Established Member
Joined
Jun 1, 2007
Messages
929
Location
Florida
I know that.

My car made 459rwhp, through a T45.... (5 speed manual)

Haven't dynod since Auto swap, don't care to, and probably won't.
 

ModularSpeed

Suspension Guru
Established Member
Joined
Jun 1, 2007
Messages
929
Location
Florida
Not really sure how the auto works from a roll.

Here is a vid racing an auto, turbo LS2 T/A. As you will see, his lights never gained during the entire race, while I was shifting. Again, his car auto...mine T45 5 speed. First race, no brake boost and no power shift (I got the jump too)....second race, brake boost and powershift.

[nomedia="http://www.youtube.com/watch?v=9fWuFswDcKA"]Friday Racing - YouTube[/nomedia]

(race # 2---1.57 into vid.)
 
Last edited:

Users who are viewing this thread



Top