Just wondering if any of you guys with the On3 kit are having this issue. Car runs smooth and pulls hard. I've been doing alot of datalogging and after a 3rd gear WOT pull, I leave a nice size cloud of white smoke as soon as I get out of the throttle. It only lasts a few seconds, but you can definitely see and smell it. I've triple checked my drain lines and they look good. I've spoken with Chad from On3 and he thinks it has something to do with vacuum getting to the crankcase.
I have breathers on my valve covers. I sourced vacuum from the passenger side PCV port on the intake manifold, the other PCV port is capped. I have a vacuum line running from the PCV port to a vacuum manifold that I mounted on the firewall. Then a vacuum line from each wastegate to the vacuum manifold. Would sourcing vacuum from the other PCV port on the manifold help? Any ideas? Thanks
I have breathers on my valve covers. I sourced vacuum from the passenger side PCV port on the intake manifold, the other PCV port is capped. I have a vacuum line running from the PCV port to a vacuum manifold that I mounted on the firewall. Then a vacuum line from each wastegate to the vacuum manifold. Would sourcing vacuum from the other PCV port on the manifold help? Any ideas? Thanks