• Welcome to SVTPerformance!

On3 Single Turbo Kit

Discussion in 'Power-Adders' started by 5.bye, Nov 8, 2018.

  1. 5.bye

    5.bye New Member Established Member

    Messages:
    16
    Joined:
    Nov 8, 2018
    Location:
    Louisiana
    So I’ve been on the market and looking for a single turbo kit. I don’t want to wait for CPR, nothing against them, I think they have a wonderful kit. Just can’t wait that long. I don’t necessarily like the JPC kit since it re-uses the stock headers and I, myself, don’t feel comfortable re-using them. Also, the hellion kit apparently is not that good at all. The On3 Single Kit interests me, but I haven’t been able to find a lot of information about it (if anybody has any more, feel free to blurt out.) So far I’m pretty set on the On3 kit with the 88mm.

    I understand there are other forums discussing the On3 kit, but they seem pretty dead and not a lot of information on how good the fitment is and the power output of the 88mm. Any information regarding this or the 76mm would be greatly appreciated.

    With all of that being said, the motor is going to be built. Motor build consists of: Short-Block:
    - [x] -Manley Platinum Series 11.5:1 CR Pistons
    - [x] -Molnar Billet H-Beam Rods
    - [x] -ARP2000 Rod Bolts
    - [x] -King HP Rod Bearings
    - [x] -Manley/AP Total Seal Rings
    - [x] -ARP Main Studs
    - [x] -King HP Main Bearings
    - [x] -Boundary OPGs/Crank Sprocket

    Long-Block:
    - [x] -ARP 11mm Head Studs
    - [x] -TrickFlow Valve Springs
    - [x] -MMR Secondary Timing Chain
    - [x] -ARP Cam Tower Bolts
    - [x] -ARP Balancer Bolt
    - [x] -ARP Cam Phaser Bolts


    Sent from my iPhone using the svtperformance.com mobile app
     
  2. jeffs

    jeffs Active Member Established Member

    Messages:
    973
    Joined:
    Apr 10, 2007
    Location:
    Rock Springs Wy.
    I'm pretty much hearing as time goes on, on3 keeps getting better. I'm in the same boat with a similarly built motor. I'm leaning towards the Hellion twin, but have heard from a shop owner the similarity between it, and the on3 twin is very high in many aspects.
     
    Last edited: Nov 15, 2018
    5.bye likes this.
  3. jeffs

    jeffs Active Member Established Member

    Messages:
    973
    Joined:
    Apr 10, 2007
    Location:
    Rock Springs Wy.
    JPC doesn't offer their kit any more, or I'd be on it myself
     
  4. w1tchblad3

    w1tchblad3 Member Established Member

    Messages:
    95
    Joined:
    Sep 12, 2013
    Location:
    Houston
    I have the on3 single 76mm I did not install it I had a shop do it and they told me there was some modifications that they needed to do. I have no track times yet but I can tell you the turbo spools very fast. It put down 768 rwhp on E85 I am still on stock block so we did not push it any further.
    If there are any questions you have just let me know.
     
    5.bye and jeffs like this.
  5. jeffs

    jeffs Active Member Established Member

    Messages:
    973
    Joined:
    Apr 10, 2007
    Location:
    Rock Springs Wy.
    How much boost to make that number?
     
  6. w1tchblad3

    w1tchblad3 Member Established Member

    Messages:
    95
    Joined:
    Sep 12, 2013
    Location:
    Houston
    That was at 11psi through a 6r80 with a circle d converter.
     
    5.bye likes this.
  7. jeffs

    jeffs Active Member Established Member

    Messages:
    973
    Joined:
    Apr 10, 2007
    Location:
    Rock Springs Wy.
    Wow man, that's stout!!
     
  8. gimmie11s

    gimmie11s Dont be a Hybred Established Member

    Messages:
    7,666
    Joined:
    Jun 1, 2004
    Location:
    so cal

    Bad ass man congrats


    Sent from my iPhone using the svtperformance.com mobile app
     
    jeffs likes this.
  9. 5.bye

    5.bye New Member Established Member

    Messages:
    16
    Joined:
    Nov 8, 2018
    Location:
    Louisiana
    That is stout man, especially for a stock motor. I’m wanting to make around 900-950whp on E85. I’m most likely gonna order the 88mm around the end of this year or January.


    Sent from my iPhone using the svtperformance.com mobile app
     
    jeffs likes this.
  10. 5.bye

    5.bye New Member Established Member

    Messages:
    16
    Joined:
    Nov 8, 2018
    Location:
    Louisiana
    That’s what I keep hearing too. I was also looking at the hellion twin, but I like the single turbo setups more than twins.


    Sent from my iPhone using the svtperformance.com mobile app
     
    jeffs likes this.
  11. jeffs

    jeffs Active Member Established Member

    Messages:
    973
    Joined:
    Apr 10, 2007
    Location:
    Rock Springs Wy.
    I like simplicity of the single over the twins for sure. I've been told the standard kits, either twin or single can get me to my power goals that are similar to yours.
     
    5.bye likes this.
  12. w1tchblad3

    w1tchblad3 Member Established Member

    Messages:
    95
    Joined:
    Sep 12, 2013
    Location:
    Houston
    I love the kit there was a few 5hings that I did not like though . Like going from two wide bands down to one . Oh and they relocate the mas sensor but don’t give you a extended harness. There was just little things I would buy the kit again in a heartbeat it is overall a good kit.
     
    5.bye likes this.
  13. 5.bye

    5.bye New Member Established Member

    Messages:
    16
    Joined:
    Nov 8, 2018
    Location:
    Louisiana
    I think every kit would have it’s up and downs. This just seems to be the best bang for your buck.


    Sent from my iPhone using the svtperformance.com mobile app
     
    jeffs likes this.
  14. slow89

    slow89 New Member Established Member

    Messages:
    11
    Joined:
    Aug 8, 2005
    Location:
    whittier
    stock OPG?
     
  15. w1tchblad3

    w1tchblad3 Member Established Member

    Messages:
    95
    Joined:
    Sep 12, 2013
    Location:
    Houston
    NO I have billet opg
     
  16. gimmie11s

    gimmie11s Dont be a Hybred Established Member

    Messages:
    7,666
    Joined:
    Jun 1, 2004
    Location:
    so cal
    Need some pics of that bad boy


    Sent from my iPhone using the svtperformance.com mobile app
     
    jeffs likes this.
  17. jeffs

    jeffs Active Member Established Member

    Messages:
    973
    Joined:
    Apr 10, 2007
    Location:
    Rock Springs Wy.
    Heard from 3 different people it doesn't take much at all to surpass the 830rwhp advertisement on the on3 website using the base 76mm. Also the other poster on this thread making nearly 770 on 11 psi would make that pretty believable imo.
     
  18. w1tchblad3

    w1tchblad3 Member Established Member

    Messages:
    95
    Joined:
    Sep 12, 2013
    Location:
    Houston
    IMG_8426.jpg
     
  19. gimmie11s

    gimmie11s Dont be a Hybred Established Member

    Messages:
    7,666
    Joined:
    Jun 1, 2004
    Location:
    so cal



    Sent from my iPhone using svtperformance.com
     
    jeffs likes this.
  20. SNIPER

    SNIPER Member Established Member

    Messages:
    248
    Joined:
    Mar 4, 2003
    Location:
    Zebulon NC
    In for the information!
     

Share This Page