Basically Im doing an eaton swap on my 98 cobra. Ill be using the 03 shortblock, C-heads, a ported blower, plenum and TB. I have a SCT BA2400 Maf, 60lb injectors, 2.76 pulley.
Here is my thing I know the 03 computer samples faster but I want to keep my 98 computer and cluster. I plan on welding in a 2nd coolant bung on the 03 coolant crossover and using the stock coolant sensors and then Im going to wire my IAT sensor to the 03's IAT2 sensor which is post blower.
I will also have an aviator pump in the tank with a vortech t-rex fuel pump. Does anyone see any potential problems with this setup I mean tuneability wise?
Here is my thing I know the 03 computer samples faster but I want to keep my 98 computer and cluster. I plan on welding in a 2nd coolant bung on the 03 coolant crossover and using the stock coolant sensors and then Im going to wire my IAT sensor to the 03's IAT2 sensor which is post blower.
I will also have an aviator pump in the tank with a vortech t-rex fuel pump. Does anyone see any potential problems with this setup I mean tuneability wise?
