Gonna give the lower intake meth injection install a shot.
With a 2.3 whipple at 19psi and a 625ml jet from Snow in one of the vacuum ports pre blower we didn't see any decrease in IAT2.
I am using a snow kit and CM5 cooling mist jets (lower profile). Going with 4 jets one for 2 cylinders and the 4 flow enough for 1000hp.
Got the intake tapped and tested the position for flow/atomization. The jets are 3.25" in from the outer edge of the intake.
Here are a few pics and a video.
Lots of volume with the four jets.
And the video.
[youtube_browser]i2Uf8LGgpEU[/youtube_browser]
With a 2.3 whipple at 19psi and a 625ml jet from Snow in one of the vacuum ports pre blower we didn't see any decrease in IAT2.
I am using a snow kit and CM5 cooling mist jets (lower profile). Going with 4 jets one for 2 cylinders and the 4 flow enough for 1000hp.
Got the intake tapped and tested the position for flow/atomization. The jets are 3.25" in from the outer edge of the intake.
Here are a few pics and a video.
Lots of volume with the four jets.
And the video.
[youtube_browser]i2Uf8LGgpEU[/youtube_browser]
Last edited: