Question about kenne bell removal

[blitz1029]

Helping a friend remove his kenne bell. He has the 2.8 mammoth non lc. Does the elbow need to come off? Seems like all the bolts we can get to have been removed but under the elbow there are a few bolts. Thanks for any help

 

[Cuda426]

Helping a friend remove his kenne bell. He has the 2.8 mammoth non lc. Does the elbow need to come off? Seems like all the bolts we can get to have been removed but under the elbow there are a few bolts. Thanks for any help

Remove the 3 Blower bolts on each side, unbolt the egr valve or the EGR tube. Slide the blower forward to release it from the blower plate lip in the front and the blower will lift off. No you do not need to remove the elbow.

 

[03chromecobra]

I am about to swap from non-mammoth to mammoth. KB told me I have everything I need to swap already. Would it literally be this easy to remove the old and put the new blower on? Obviously I know I need a re-tune. This would be non LC.

 

[Van@RevanRacing]

I am about to swap from non-mammoth to mammoth. KB told me I have everything I need to swap already. Would it literally be this easy to remove the old and put the new blower on? Obviously I know I need a re-tune. This would be non LC.

Yes, it is literally that easy.

 

[03chromecobra]

Thanks!