Originally posted by flyn high again
I ran mine from the visor along under the head liner trim and then under the A pillar trim piece to the outside of the dash board. Then down underneath the edge of the rubber trim piece to the bottom of the dash board. Then underneath the dash to the fuse panel. :beer:
Welcome to the forums! If you do a search, you'll find a lot of info on the topic...
It pulls off, there is a couple of clips holding it on.Originally posted by bones
Thanks. Does the A-pillar trim come off or do you just squeeze the wire under it? I don't see any screws. Afraid to pull hard on it.