Looking for a little advice on where to look first.
Recently had the rear end of the car apart upgrading to the Ford Diff cover. While doing this I also replaced the drivers side rear wheel bearing and hub that was pretty galled, fortunately the knuckle was still ok.
Got everything back together and noticed the parking brake handle was harder to pull than previously...can only get 1 click out of it now. Anyways, didn’t think much about it and went for a drive, the drivers side brake is definitely dragging. Pass side is fine.
I suppose it could be a frozen slider pin, but it seems too coincidental that the parking brake handle is harder to pull now.
I did try the search function and after an hour of looking, decided to write this.
Thanks for the help/advice...I plan to get back in there tomorrow morning.
Recently had the rear end of the car apart upgrading to the Ford Diff cover. While doing this I also replaced the drivers side rear wheel bearing and hub that was pretty galled, fortunately the knuckle was still ok.
Got everything back together and noticed the parking brake handle was harder to pull than previously...can only get 1 click out of it now. Anyways, didn’t think much about it and went for a drive, the drivers side brake is definitely dragging. Pass side is fine.
I suppose it could be a frozen slider pin, but it seems too coincidental that the parking brake handle is harder to pull now.
I did try the search function and after an hour of looking, decided to write this.
Thanks for the help/advice...I plan to get back in there tomorrow morning.