SN95 IAT question - Procharger

[01silverstang]

My 96’ Cobra was purchased with a VMP blow through MAF setup, and I noticed the IAT sensor is still plugged into the power pipe.

Can I wire the IAT harness directly to the slot style MAF sensor to integrate the IAT and if so what is the proper way to do this? If not will I just have to add a spot for the separate sensor post blower to get accurate IAT?

 

[01yellercobra]

IIRC the IAT pins are the outside two pins on the MAF plug. Provided it has the 6 pin connector. And that it doesn't matter which way they're wired.

If you end up running a separate IAT sensor in that pipe I would suggest picking up a Lightning IAT2 sensor and matching bung.

 

[2003RedfireVert]

I wired mine into the slot style MAF on my 01 GT with a blow through setup. Easy.

 

[01silverstang]

I wired mine into the slot style MAF on my 01 GT with a blow through setup. Easy.

VMP makes it seem like you can only wire it directly on the 99-04, was sure if I could cut the IAT harness and solder to the VMP MAF harness on a 96?

 

[01silverstang]

IIRC the IAT pins are the outside two pins on the MAF plug. Provided it has the 6 pin connector. And that it doesn't matter which way they're wired.

If you end up running a separate IAT sensor in that pipe I would suggest picking up a Lightning IAT2 sensor and matching bung.

Do you know if this works with a 96?

 

[01silverstang]

So orientation doesn’t matter?

 

[2003RedfireVert]

I’m not sure on the 99-04 thing from VMP. 96-mid01 had IATs separate from the MAF. I can’t confirm it will work pre 99 but I don’t see why not. Mid01-04 had IAT integrated with the MAF and MAF harness.

 

[01silverstang]

I’m not sure on the 99-04 thing from VMP. 96-mid01 had IATs separate from the MAF. I can’t confirm it will work pre 99 but I don’t see why not. Mid01-04 had IAT integrated with the MAF and MAF harness.

VMP website confirmed with my solder in harness I can do it, just wanted to confirm that I can connect the IAT wires to either of the grey from the harness, orientation doesn’t matter.

 

[2003RedfireVert]

It’s been too long for me but I’m sure the direction given above is spot on. 01yeller knows his stuff