Spark Plugs for Nitrous Cars

trakit

Member
Established Member
Joined
Jul 2, 2012
Messages
133
Location
TX
What is the best spark plug for one of these cars with Nitrous?

I am planning on running a 150 Shot with minor bolt-ons. I have heard one step colder?

Some have suggested Brisk RR145?

Also I have heard stories of 02s going bad with Nitrous cars? Any suggestions there?
 

mastwolf

4800fps = Mach1 in h2o
Established Member
Joined
Feb 18, 2005
Messages
1,396
Location
FL/Texas
I ran almost a 200 shot, and I used an NGK plug with a heat range of 7. Close up the gap some and your good to go.

Im not a big fan of brisk plugs in colder ranges.
 

JUIC3D

Boost Junkie
Established Member
Joined
Apr 24, 2011
Messages
2,551
Location
Florida
02s go bad with leaded fuel and moisture. Avoid those and you should be fine..

I run NGK 6510s but that defies traditional nitrous plug thinking.

6510s come gapped out of the box at around .045 and I don't feel comfortable closing the gap down as far as 032. I run mine right at .036 and so far, so good.
 
Last edited:

SteveG@Lethal

Active Member
Established Member
Joined
Jun 17, 2011
Messages
3,145
Location
Florida
The NGK 6510's have worked fine with nitrous cars without any issues. We trust them very much. The Brisk plug's do work well though. Will pay a few dollars more.
 

Users who are viewing this thread



Top